[madsowry]

Hi All.  Any body know where the 2 leads that supply the coil on the shadow meter of a Philco 14 code 122 are connected.  The coil was shot on this thing so I rewound it and tested it with some batteries and it was a success.  I mounted it on the chassis and it didn't work.  Happen to look under the chassis and the black wire had been cut and pushed under another wire.  This chassis was restored by a friend and it works really well but its a little messy.  I'm not going to mess with  it cause it plays good.
  The schematic shows the shadow meter connecting to both IFs but the original red wire does not attach to the first IF.  It goes to 51, the 6.5k resistor.  I tried with alligator clips to attach both red and black to the IFs.  No good.  
  Any help would be greatly appreciated.  
  Thanks

Dick