10-21-2025, 06:13 PM
hello. The red wire attached to #51 resistor should be correct. It's in the same circuit as the ifs.
Make sure the black wire is connected to the primary of the 1st if transformer.
Might also make sure the red wire is connected to the second transformer if primary.
If it still won't work I hope someone will chime in with other suggestions.
Hope this helps.
Make sure the black wire is connected to the primary of the 1st if transformer.
Might also make sure the red wire is connected to the second transformer if primary.
If it still won't work I hope someone will chime in with other suggestions.
Hope this helps.
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
