12-03-2025, 06:39 PM
I believe I’m back to my first post. As I mentioned the entire 4 section cap was missing when I was given it and it looks like I miswired in one or more of those 4 caps.
It looks very simple on the schematic to find the tie-points for those 4 caps but when I look at the chassis I am somewhat lost. Where parts actually are and where they should go on the chassis, is a process that I have yet to master.
I probably attached one or more of these caps to the wrong end of a resistor, or attached one of the wires to the wrong lug. I will trace out what I have done and see if anything pops out.
In the meantime any suggestions are more than welcome.
It looks very simple on the schematic to find the tie-points for those 4 caps but when I look at the chassis I am somewhat lost. Where parts actually are and where they should go on the chassis, is a process that I have yet to master.
I probably attached one or more of these caps to the wrong end of a resistor, or attached one of the wires to the wrong lug. I will trace out what I have done and see if anything pops out.
In the meantime any suggestions are more than welcome.
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
