12-04-2025, 05:56 PM
I want to thank everyone, special kudos to MrFixr55, for providing guidance on how to get this radio working.
The 2K resistor was missing and the 7750 wire wound was not connected properly to bakelite block #47. It was connected to the ground of that #47 block and the other end was grounded as well. The blue circles in the enclosed photo.
Not sure how I missed the 2K but lesson learned to be more vigilant next time. I learned a lot working on this radio, definitely be using those lessons for the next project.
By the way, the radio works very well now. Much appreciation to all!
The 2K resistor was missing and the 7750 wire wound was not connected properly to bakelite block #47. It was connected to the ground of that #47 block and the other end was grounded as well. The blue circles in the enclosed photo.
Not sure how I missed the 2K but lesson learned to be more vigilant next time. I learned a lot working on this radio, definitely be using those lessons for the next project.
By the way, the radio works very well now. Much appreciation to all!
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
