[Nick g]

I am new to the Phorum and need help.  I have a 37-611 Big Bullet and the schematic is confusing. It has been work on prior to my acquiring it.  The chassis has some aspects of the 610 and some of the 611. In mine there are three electrolitics and two Bakelite condensers.  There is a wire wound resistor next to the dual Bakelite condenser I can’t locate on the schematic.  It has 4 solder lugs where the wires have been cut and I am not sure where to connect them. In another section there are 2 condensers and a resistor wired to ground in my radio that don’t show on my schematic but do show on the schematic for the 610. Very confusing.