Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x


ID This Model
#31

Actually, English language Wikipedia is reasonably accurate.
And, mind you, no oen 100% accurate, even atomic clock and тхе International Bureau of Weights and Measures (OK, well, how accurate can be anything that is near Paris, France, right)?

Actually, while back in the USSR, we had an expression, kinda analogous to "cut the air with a knife" when it refers to pollution (yes it could refer to anything intangibe that is thick, atmosphere, mood and, yes, pollution). The expression is "you could hang up an axe".
So we invented a physical unit for pollution call "1 Perd" (1 Fart), and the definiton was that the air should be as thick as to allow to hang up a platinum-iridium ax weighing 1kg at the height of 1m from the Earth' surface.
For practical measurements the suggested units would be 1mF (milli-Fart) as to achieve 1F to that moment was not possible.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.


Messages In This Thread
ID This Model - by RodB - 03-26-2026, 11:09 AM
RE: ID This Model - by morzh - 03-26-2026, 07:23 PM
RE: ID This Model - by morzh - 03-26-2026, 08:38 PM
RE: ID This Model - by Joe Rossi - 03-26-2026, 09:34 PM
RE: ID This Model - by morzh - 03-26-2026, 09:40 PM
RE: ID This Model - by DaleHCook - 03-26-2026, 10:20 PM
RE: ID This Model - by morzh - 03-27-2026, 08:51 AM
RE: ID This Model - by RodB - 03-27-2026, 01:59 PM
RE: ID This Model - by morzh - 03-27-2026, 02:04 PM
RE: ID This Model - by Arran - 03-27-2026, 02:40 PM
RE: ID This Model - by RodB - 03-27-2026, 02:40 PM
RE: ID This Model - by MrFixr55 - 03-27-2026, 02:45 PM
RE: ID This Model - by RodB - 03-27-2026, 02:53 PM
RE: ID This Model - by morzh - 03-27-2026, 06:44 PM
RE: ID This Model - by DaleHCook - 03-27-2026, 07:21 PM
RE: ID This Model - by morzh - 03-27-2026, 08:07 PM
RE: ID This Model - by RodB - 03-27-2026, 09:54 PM
RE: ID This Model - by MrFixr55 - 03-27-2026, 10:15 PM
RE: ID This Model - by RodB - 03-27-2026, 11:47 PM
RE: ID This Model - by Joe Rossi - 03-28-2026, 05:51 AM
RE: ID This Model - by morzh - 03-28-2026, 09:04 AM
RE: ID This Model - by Joe Rossi - 03-28-2026, 09:49 AM
RE: ID This Model - by RodB - 03-28-2026, 10:24 AM
RE: ID This Model - by DaleHCook - 03-28-2026, 10:24 AM
RE: ID This Model - by RodB - 03-28-2026, 10:30 AM
RE: ID This Model - by RodB - 03-28-2026, 10:41 AM
RE: ID This Model - by morzh - 03-28-2026, 03:27 PM
RE: ID This Model - by DaleHCook - 03-28-2026, 03:54 PM
RE: ID This Model - by morzh - 03-28-2026, 04:22 PM
RE: ID This Model - by MrFixr55 - 03-28-2026, 06:38 PM
RE: ID This Model - by morzh - 03-28-2026, 06:52 PM
RE: ID This Model - by DaleHCook - 03-29-2026, 10:01 AM
RE: ID This Model - by morzh - 03-29-2026, 10:29 AM
RE: ID This Model - by RodB - 03-29-2026, 11:31 AM
RE: ID This Model - by Arran - 03-29-2026, 05:13 PM
RE: ID This Model - by DaleHCook - 03-29-2026, 08:16 PM
RE: ID This Model - by morzh - 03-29-2026, 09:08 PM
RE: ID This Model - by Arran - 03-29-2026, 10:18 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 71 Code 125
Technically, that's C-. B- is chassis ground. The resistor between chassis ground and the HV center tap makes the HV c...MrFixr55 — 11:24 PM
54C Cabinet Refinish
hello Roy, I’d follow Arran’s suggestion and use automotive gasket material, which I keep around for situations like th...radiorich — 10:22 PM
Philco 71 Code 125
This might be one of those cases where it's a ground to an AC voltage and B- to DC.RodB — 08:22 PM
Philco 71 Code 125
Really Rod? I know you would not steer me wrong but AI say this is a short circuit? What if I moved the 6 volt center ta...dconant — 06:40 PM
54C Cabinet Refinish
Roy; Personally I would have left the asbestos alone if it were my set, but you can find a modern substitute that som...Arran — 04:51 PM
Philco 71 Code 125
Looks like that might be the B- buss, so that would be correct.RodB — 01:32 PM
Philco 71 Code 125
I noticed on the code 121 schematic the center tap for the 6 volt winding and hv winding are tied together. Is this corr...dconant — 12:16 PM
Philco 45-6365 Universal IFT Instruction Manual
The Philco Parts Catalog for 1942 shows it as usable for 175 kHz, 260 kHz, and 465 kHz. The instructions will show how t...DaleHCook — 11:19 AM
Stromberg Carlson 1500 Squeal
Hello Rob, I agree with you—I have one here at my house that I need to check out. It’s way over-engineered just to make...radiorich — 11:05 AM
My Atwater Kent 84
Well getting around to restoring my AK84. Mike was a big part in me being able to snatch this one a few years ago. I won...462ron — 10:57 AM

[-]
Who's Online
There are currently no members online.

>