Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x


40-190 antenna, ground
#2

For the reception, if your radio is known good - the GND and the antenna.
For the noise, if you do not live next to the power line, see if you have a DCDC converters (any modern electronics, wallwarts, wall chargers, CCFL/LED lights so on, so foth) nearby or in close vicinity. Or the neighbor across the wall with all that.

One way of mitigating (but not necessarily eliminating) this problem is an X-cap across the power line inside the radio (0.1uF - 1uF, X-rated for 127VAC at least). Or a box with a good AC power filter inside (like those by Schaffner).

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.


Messages In This Thread
40-190 antenna, ground - by fenwayfitz - 05-13-2026, 04:45 PM
RE: 40-190 antenna, ground - by morzh - 05-13-2026, 06:59 PM
RE: 40-190 antenna, ground - by MrFixr55 - 05-18-2026, 02:30 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 71 Code 125
Ok guys. Thanks for the input. As for AI this is why I ask the experts. Dandconant — 07:39 AM
Philco 71 Code 125
Technically, that's C-. B- is chassis ground. The resistor between chassis ground and the HV center tap makes the HV c...MrFixr55 — 11:24 PM
54C Cabinet Refinish
hello Roy, I’d follow Arran’s suggestion and use automotive gasket material, which I keep around for situations like th...radiorich — 10:22 PM
Philco 71 Code 125
This might be one of those cases where it's a ground to an AC voltage and B- to DC.RodB — 08:22 PM
Philco 71 Code 125
Really Rod? I know you would not steer me wrong but AI say this is a short circuit? What if I moved the 6 volt center ta...dconant — 06:40 PM
54C Cabinet Refinish
Roy; Personally I would have left the asbestos alone if it were my set, but you can find a modern substitute that som...Arran — 04:51 PM
Philco 71 Code 125
Looks like that might be the B- buss, so that would be correct.RodB — 01:32 PM
Philco 71 Code 125
I noticed on the code 121 schematic the center tap for the 6 volt winding and hv winding are tied together. Is this corr...dconant — 12:16 PM
Philco 45-6365 Universal IFT Instruction Manual
The Philco Parts Catalog for 1942 shows it as usable for 175 kHz, 260 kHz, and 465 kHz. The instructions will show how t...DaleHCook — 11:19 AM
Stromberg Carlson 1500 Squeal
Hello Rob, I agree with you—I have one here at my house that I need to check out. It’s way over-engineered just to make...radiorich — 11:05 AM

[-]
Who's Online
There are currently no members online.

>