05-14-2026, 10:27 PM
Hello Jimradio,
in the real world, yes, the narrow blade on the polarized cord would go to the switch. However, you’d need to rewire the switch so that the wire leading to the diode is connected to the switch instead of the chassis, as otherwise the chassis could become hot.
So the wide prong on the plug would go to the chassis instead .
Sincerely Richard
in the real world, yes, the narrow blade on the polarized cord would go to the switch. However, you’d need to rewire the switch so that the wire leading to the diode is connected to the switch instead of the chassis, as otherwise the chassis could become hot.
So the wide prong on the plug would go to the chassis instead .
Sincerely Richard
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
