Zenith H845 cord

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Linear Mode

Zenith H845 cord

Jimradio
Senior Member

Posts: 258
Threads: 39
Joined: Jul 2016
City: Spring Lake MI

05-16-2026, 07:28 AM

If it were to be done with the hot lead (narrow pin) going to the diode (replaced the selenium rectifier) and the neutral lead going to the chassis, that would eliminate C43, R42 the C44 could stay or not. Am I right in thinking this.
Or leave it as the factory did it with the interlock on the back, and the factory cord, non-polarized.
Thanks

Jim
Spring Lake MI

Find

« Next Oldest | Next Newest »

Messages In This Thread

Zenith H845 cord - by Jimradio - 05-14-2026, 07:21 PM

RE: Zenith H845 cord - by radiorich - 05-14-2026, 10:27 PM

RE: Zenith H845 cord - by Jimradio - 05-15-2026, 08:11 AM

RE: Zenith H845 cord - by Jimradio - 05-16-2026, 07:28 AM

RE: Zenith H845 cord - by Jimradio - 05-16-2026, 07:47 AM

View a Printable Version

Users browsing this thread: 1 Guest(s)

Recent Posts
54C Cabinet Refinish
Roy; Personally I would have left the asbestos alone if it were my set, but you can find a modern substitute that som...Arran — 04:51 PM
Philco 71 Code 125
Looks like that might be the B- buss, so that would be correct.RodB — 01:32 PM
Philco 71 Code 125
I noticed on the code 121 schematic the center tap for the 6 volt winding and hv winding are tied together. Is this corr...dconant — 12:16 PM
Philco 45-6365 Universal IFT Instruction Manual
The Philco Parts Catalog for 1942 shows it as usable for 175 kHz, 260 kHz, and 465 kHz. The instructions will show how t...DaleHCook — 11:19 AM
Stromberg Carlson 1500 Squeal
Hello Rob, I agree with you—I have one here at my house that I need to check out. It’s way over-engineered just to make...radiorich — 11:05 AM
My Atwater Kent 84
Well getting around to restoring my AK84. Mike was a big part in me being able to snatch this one a few years ago. I won...462ron — 10:57 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
The engine is a B&S 23 inch cast Iron holds 2 quarts of oil. The Generator is a 4 pole 1800 rpm mine was made in 195...David — 10:51 AM
Philco 45-6365 Universal IFT Instruction Manual
Dale: Modified topic as suggested. It is not for a specific project. I found it in a box of stuff I recently purchased...GRG — 10:34 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
That looks a lot like an aircraft connector of some kind ... That is a MIL-5015 style connector, used in a wide v...DaleHCook — 10:19 AM
Philco P45-6365 Universal Transformer Instruction Manual
I would suggest changing the topic from "P45-6365 Universal Transformer" to "45-6365 Universal IFT."...DaleHCook — 10:08 AM

Who's Online

There are currently 1281 online users. [Complete List]
» 2 Member(s) | 1279 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me