[morzh]

Welcome!

Please tell us what version of 60 you have and what run.

This is the article to find it out from.

https://philcoradio.com/library/index.ph...-model-60/

Now, when you say "no voltages", OK. Does that mean, not on the 8uF caps 45 and 46?

210VDC is low.

1. Remove every single tube And the rectifier.
2. Unplug/unsolder (what's applicable) the Field coil. Label/photograph the leads in citu before you do it.
3. Measure across the 1st and 2nd 8uF caps (##46/45). See if you have very low resistance/a short.

Check all tubes.
Check the rectifier tube.

Report here, then we will proceed.
A possible