RCA 6K3 Preliminary Capacitor/Resistor Research
Posts: 18,428
Threads: 622
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
One thing I've been meaning to ask, as I don't want to go back and re-read the whole thing:
1) Have you done the full recap as we discussed?
2) Have you tested all your tubes, and, if yes (and they tested good on a tester that tests a bit more than the emission), have you tried replacing them?
I probably should've stated that before, but the tube is the same as the capacitor, that is a component and should be confirmed good BEFORE you do any troubleshooting.
As well as most of teh components, especially those that are easily removable and tested.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Messages In This Thread
RE: RCA 6K3 Preliminary Capacitor/Resistor Research - by morzh - 05-26-2026, 11:03 AM
Users browsing this thread: 7 Guest(s)
|
|
Recent Posts
|
|
Philco 71 Code 125
|
| I jumped the gun and stand corrected.RodB — 12:53 PM |
|
Philco 71 Code 125
|
| Ok guys. Thanks for the input. As for AI this is why I ask the experts.
Dandconant — 07:39 AM |
|
Philco 71 Code 125
|
| Technically, that's C-. B- is chassis ground. The resistor between chassis ground and the HV center tap makes the HV c...MrFixr55 — 11:24 PM |
|
54C Cabinet Refinish
|
| hello Roy,
I’d follow Arran’s suggestion and use automotive gasket material, which I keep around for situations like th...radiorich — 10:22 PM |
|
Philco 71 Code 125
|
| This might be one of those cases where it's a ground to an AC voltage and B- to DC.RodB — 08:22 PM |
|
Philco 71 Code 125
|
| Really Rod? I know you would not steer me wrong but AI say this is a short circuit? What if I moved the 6 volt center ta...dconant — 06:40 PM |
|
54C Cabinet Refinish
|
| Roy;
Personally I would have left the asbestos alone if it were my set, but you can find a modern substitute that som...Arran — 04:51 PM |
|
Philco 71 Code 125
|
| Looks like that might be the B- buss, so that would be correct.RodB — 01:32 PM |
|
Philco 71 Code 125
|
| I noticed on the code 121 schematic the center tap for the 6 volt winding and hv winding are tied together. Is this corr...dconant — 12:16 PM |
|
Philco 45-6365 Universal IFT Instruction Manual
|
| The Philco Parts Catalog for 1942 shows it as usable for 175 kHz, 260 kHz, and 465 kHz. The instructions will show how t...DaleHCook — 11:19 AM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
