RCA 6K3 Preliminary Capacitor/Resistor Research
Posts: 1,800
Threads: 55
Joined: Feb 2015
City: Roseville, MN
Yes, this is very confusing. The voltages go to normal without the 6A8 but any reasoning for the cause of the problem, other than a shorted grid, is beyond me.
Messages In This Thread
RE: RCA 6K3 Preliminary Capacitor/Resistor Research - by RodB - 05-26-2026, 01:32 PM
Users browsing this thread: 7 Guest(s)
|
|
Recent Posts
|
|
Philco 71 Code 125
|
| I jumped the gun and stand corrected.RodB — 12:53 PM |
|
Philco 71 Code 125
|
| Ok guys. Thanks for the input. As for AI this is why I ask the experts.
Dandconant — 07:39 AM |
|
Philco 71 Code 125
|
| Technically, that's C-. B- is chassis ground. The resistor between chassis ground and the HV center tap makes the HV c...MrFixr55 — 11:24 PM |
|
54C Cabinet Refinish
|
| hello Roy,
I’d follow Arran’s suggestion and use automotive gasket material, which I keep around for situations like th...radiorich — 10:22 PM |
|
Philco 71 Code 125
|
| This might be one of those cases where it's a ground to an AC voltage and B- to DC.RodB — 08:22 PM |
|
Philco 71 Code 125
|
| Really Rod? I know you would not steer me wrong but AI say this is a short circuit? What if I moved the 6 volt center ta...dconant — 06:40 PM |
|
54C Cabinet Refinish
|
| Roy;
Personally I would have left the asbestos alone if it were my set, but you can find a modern substitute that som...Arran — 04:51 PM |
|
Philco 71 Code 125
|
| Looks like that might be the B- buss, so that would be correct.RodB — 01:32 PM |
|
Philco 71 Code 125
|
| I noticed on the code 121 schematic the center tap for the 6 volt winding and hv winding are tied together. Is this corr...dconant — 12:16 PM |
|
Philco 45-6365 Universal IFT Instruction Manual
|
| The Philco Parts Catalog for 1942 shows it as usable for 175 kHz, 260 kHz, and 465 kHz. The instructions will show how t...DaleHCook — 11:19 AM |
|
Who's Online
|
| There are currently no members online. |
|

|