Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x


RCA 6K3 Preliminary Capacitor/Resistor Research

Hi Roy,

Great progress!

Yeah, living near a 45KV power line is not great for radio reception, and not great for a lot of things.  A lot of environmentalists raise questions about the health effects of radiation.  One activist stood under a HV transmission line (Possibly 100KV or 1 Megavolt) with a standard fluorescent tube.  The tube glowed. (Hey, if that happens, wind a coil to pick up some free electricity!

I can't remember if the strongest interference is if your inverted L antenna parallels the power line or is perpendicular to it.  Use a radio with a loopstick antenna, tune in a desired station and rotate the radio for the loudest signal with the least noise.  This is the direction that your Inverted L Antenna should point.

The ground rod ideally should be sunk 8Ft.  It is OK of it is not straight down.  It can be diagonal or even laid in a ditch horizontally and buried.  Moisture is important.

"Do Justly, love Mercy and walk humbly with your God"- Micah 6:8
"Let us begin to do good"- St. Francis

Best Regards, 

MrFixr55


Messages In This Thread
RE: RCA 6K3 Preliminary Capacitor/Resistor Research - by MrFixr55 - 07-12-2026, 04:26 PM



Users browsing this thread: 8 Guest(s)
[-]
Recent Posts
Philco 71 Code 125
I jumped the gun and stand corrected.RodB — 12:53 PM
Philco 71 Code 125
Ok guys. Thanks for the input. As for AI this is why I ask the experts. Dandconant — 07:39 AM
Philco 71 Code 125
Technically, that's C-. B- is chassis ground. The resistor between chassis ground and the HV center tap makes the HV c...MrFixr55 — 11:24 PM
54C Cabinet Refinish
hello Roy, I’d follow Arran’s suggestion and use automotive gasket material, which I keep around for situations like th...radiorich — 10:22 PM
Philco 71 Code 125
This might be one of those cases where it's a ground to an AC voltage and B- to DC.RodB — 08:22 PM
Philco 71 Code 125
Really Rod? I know you would not steer me wrong but AI say this is a short circuit? What if I moved the 6 volt center ta...dconant — 06:40 PM
54C Cabinet Refinish
Roy; Personally I would have left the asbestos alone if it were my set, but you can find a modern substitute that som...Arran — 04:51 PM
Philco 71 Code 125
Looks like that might be the B- buss, so that would be correct.RodB — 01:32 PM
Philco 71 Code 125
I noticed on the code 121 schematic the center tap for the 6 volt winding and hv winding are tied together. Is this corr...dconant — 12:16 PM
Philco 45-6365 Universal IFT Instruction Manual
The Philco Parts Catalog for 1942 shows it as usable for 175 kHz, 260 kHz, and 465 kHz. The instructions will show how t...DaleHCook — 11:19 AM

[-]
Who's Online
There are currently no members online.

>