Variation with the 37-650

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Variation with the 37-650

Bill Hutchinson
Member

Posts: 236
Threads: 30
Joined: Sep 2005
City: Minneapolis/St. Paul MN

09-27-2006, 06:07 PM

This question is primarily for Ron, but if anyone else has info as well, feel free to chime in.

I noted in the Philco Gallery a different variation on the 37-650 console. On that one, there are a couple of horizontal inlays on both side of the dial, and on mine, which is pictured in a previous thread on the Phorum:

http://philcoradio.com/phorum/showthread.php?tid=2

...it has 2 thin vertical inlays about 4 inces either side of the dial. This is the version of the 37-650 I've seen elsewhere besides the one I have. Otherwise, the two appear to be identical in every other aspect.

I'm just wondering if there is documentation regarding the two versions of this console, and how common it was to have this or other variations on other Philco models.

Thanks in advance for anything you can provide.

Bill

Sent from my Pentium II on the AT&T Dial Network

Find

« Next Oldest | Next Newest »

Thread Closed

Messages In This Thread

Variation with the 37-650 - by Bill Hutchinson - 09-27-2006, 06:07 PM

[No subject] - by PTurney - 09-27-2006, 06:19 PM

[No subject] - by Bill Hutchinson - 09-27-2006, 06:28 PM

[No subject] - by Ron Ramirez - 09-27-2006, 08:11 PM

[No subject] - by Ron Ramirez - 09-28-2006, 11:03 AM

[No subject] - by Bill Hutchinson - 09-29-2006, 09:40 AM

[No subject] - by Ron Ramirez - 10-06-2006, 11:00 AM

[No subject] - by Bill Hutchinson - 10-06-2006, 04:37 PM

[No subject] - by Ron Ramirez - 10-09-2006, 09:35 AM

View a Printable Version

Users browsing this thread: 1 Guest(s)

Recent Posts
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM

Who's Online
There are currently no members online.

Login
Username:
Password:	Lost Password?
	Remember me