Spray Lacquer Question?

Register

Guest Join Us

Hello Guest,

Please feel free to join us!
There are many more parts of the Phorum that only members can see.

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Spray Lacquer Question?

ipwizard
Senior Member

Posts: 335
Threads: 50
Joined: Apr 2011
City: Apple Creek State, Province, Country: Ohio

#9

03-06-2012, 02:33 PM

On my 71B I sprayed a couple coats of Deft semi-gloss then steelwooled it (#0000). A couple more coats then let it dry for about 4-5 days. I used Behlen's fine pumice stone with some mineral oil and rubbed the finish out, then I went to rottenstone and mineral oil for the final polish. This got rid of all the orange peel any any overspray. Finally I buffed the finsh with some Minwax wood wax.

-Keith

Find

« Next Oldest | Next Newest »

Messages In This Thread

Spray Lacquer Question? - by Pepperoni - 10-24-2011, 07:33 PM

RE: Spray Lacquer Question? - by Ron Ramirez - 02-28-2012, 07:13 PM

RE: Spray Lacquer Question? - by codefox1 - 02-28-2012, 11:31 PM

RE: Spray Lacquer Question? - by squeeker7 - 03-03-2012, 05:36 PM

RE: Spray Lacquer Question? - by ipwizard - 03-06-2012, 02:33 PM

RE: Spray Lacquer Question? - by TA Forbes - 03-06-2012, 02:38 PM

RE: Spray Lacquer Question? - by magicclocks - 04-22-2012, 05:57 PM

RE: Spray Lacquer Question? - by LedHed - 04-25-2012, 01:01 AM

RE: Spray Lacquer Question? - by Ron Ramirez - 04-25-2012, 07:32 AM

RE: Spray Lacquer Question? - by Pepperoni - 04-29-2012, 04:34 PM

RE: Spray Lacquer Question? - by gary rabbitt - 06-11-2012, 06:44 PM

Re: Spray Lacquer Question? - by exray - 10-25-2011, 06:02 AM

Re: Spray Lacquer Question? - by Pepperoni - 10-26-2011, 11:19 AM

RE: Spray Lacquer Question? - by Pepperoni - 02-28-2012, 07:08 PM

RE: Spray Lacquer Question? - by 37silverstreak - 02-28-2012, 08:56 PM

View a Printable Version

Users browsing this thread:

Recent Posts
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM
Testing a speaker and output transformer Trutone A2-G
morzh Short-circuited turns can be considered as a half-dead transformer. But on this case transformer will hot and s...Vlad95 — 11:01 AM
Testing a speaker and output transformer Trutone A2-G
I am not sure how a transformer could be weak. It could be inadequate, but only when you replace the original with somet...morzh — 09:56 AM

Who's Online

There are currently 2278 online users. [Complete List]
» 4 Member(s) | 2274 Guest(s)