Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Phorum How-To #7: How Can I Change My Time Zone?
#1

First, go to your User CP. Now, click or tap Edit Options under Your Profile.

[Image: https://philcoradio.com/images/phorum/Ph...07_001.jpg]

Look for the Date and Time Options section:

[Image: https://philcoradio.com/images/phorum/Ph...07_003.jpg]

Under "Date and Time Options," look for the text which reads "If you live in a time zone which differs to what this board is set at, you can select it from the list below."

The default time setting for the Phorum is US Eastern Time which is GMT -5:00.

To change it to your local time zone:

Click or tap the drop-down box labeled "GMT -5:00 (current time)" with a time setting, as shown below:

[Image: https://philcoradio.com/images/phorum/Ph...07_004.jpg]

From this drop-down box, select or tap the time zone where you live.

Hint - GMT -5:00 = Eastern Time Zone.
GMT -6:00 = Central Time Zone.
GMT -7:00 = Mountain Time Zone.
GMT -8:00 = Pacific Time Zone.

For Phorum members living outside the USA, you should be able to figure out the proper settings here.



Other Time Settings

While you are here, you can also change a few other settings if you wish to do so.

Date Format

If the date format is not to your liking, click or tap the drop-down box and change it from the system default to whatever you wish.

[Image: https://philcoradio.com/images/phorum/Ph...07_005.jpg]

Time Format

If the time format is not to your liking, click or tap the drop-down box and change it from the system default to whatever you wish.

[Image: https://philcoradio.com/images/phorum/Ph...07_006.jpg]

Finally, you may choose whether you want the system to compensate for Daylight Saving Time or not:

[Image: https://philcoradio.com/images/phorum/Ph...07_007.jpg]

Select or tap the DST setting you prefer in this drop-down box.

When you are finished, click or tap the "Update Options" button...and your settings will be saved.


Messages In This Thread
Phorum How-To #7: How Can I Change My Time Zone? - by admin - 03-06-2012, 07:36 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 42-345 Restoration/Repair
The thrill is gone again, thought I was close to being done with it. Well Friday it was receiving broadcast, Saturday mo...osanders0311 — 07:47 PM
Help with Supreme 599
Iam getting closer to fixing it. I bumped Up the tranny voltage to get 5v on the 80 tube. I gan get the needle to move ...daveone23 — 03:41 PM
Philco 42-345 Restoration/Repair
Hello RodB, Checking my previous post I realized you're the one with the 42-340. I replaced the string for the tuning...osanders0311 — 03:12 PM
5U4 vs 5Z4 tubes
I saw no evidence of anything going wrong. The transformer is fused already which is nice. Interestingly the 5z4 did...bridkarl — 02:37 PM
5U4 vs 5Z4 tubes
I doubt anything cooked in 30 seconds because of the oops! These are very similar tubes, and nothing but transformer re...GarySP — 02:30 PM
Restoration of the Canadian General Electric A-87
Paul Philco322.You will be keeping very busy, you may have to go back to work for a breakIcon_smile. Paul To rel...RadioSvit — 01:57 PM
5U4 vs 5Z4 tubes
I grabbed the wrong tube and put in a 5U4 tube instead of the 5Z4 - I just had the rectifier in with no other tubes. Af...bridkarl — 01:54 PM
Restoration of the Canadian General Electric A-87
After applying the filler to the entire body, I noticed that the shades of the facade and the side and top walls were ve...RadioSvit — 01:49 PM
Restoration of the Canadian General Electric A-87
You will be keeping very busy, you may have to go back to work for a break:). PaulPaul Philco322 — 01:46 PM
Restoration of the Canadian General Electric A-87
After removing the control knobs, chassis, dynamics and scale frame, I first started restoring the torn piece of veneer....RadioSvit — 01:20 PM

[-]
Who's Online
There are currently 1011 online users. [Complete List]
» 1 Member(s) | 1010 Guest(s)
Avatar

>