Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

WHICH 690 IS BEST BET?
#22

Quote:Sam

Now, don't blame me for your radio obsession! Icon_wink

But seriously...I saw your post on the Scott forum, and I also wrote a brief reply there.

I suspect the guy who was looking to sell the four Scott sets has probably already sold them to someone who made an offer he couldn't refuse, and I doubt that you (or Norman) will ever hear from him again. I may be wrong, I know. So I'm cynical. So pardon me. Icon_lol

It depends on what he means by the seller "Dragging His Feet", if the seller didn't respond perhaps he already sold them. But if he did respond saying he still had them, but later sold them, he should stop giving people the run around, tell them they have sold, and remove the posting. Personally I think that there should be a rule on such forums that if you post something for sale, and it sells, you should announce that it's gone and remove the ad, or get a reprimand of some sort. I know of at least one such forum that does that, but not a radio forum, if something is sold it has to be declared as sold, and the thread locked.
Regards
Arran


Messages In This Thread
WHICH 690 IS BEST BET? - by Sam samuelian - 06-13-2012, 07:31 AM
RE: WHICH 690 IS BEST BET? - by codefox1 - 06-13-2012, 02:01 PM
RE: WHICH 690 IS BEST BET? - by Ron Ramirez - 06-13-2012, 04:41 PM
RE: WHICH 690 IS BEST BET? - by Sam samuelian - 06-13-2012, 04:50 PM
RE: WHICH 690 IS BEST BET? - by TA Forbes - 06-13-2012, 09:32 PM
RE: WHICH 690 IS BEST BET? - by Arran - 06-14-2012, 12:57 AM
RE: WHICH 690 IS BEST BET? - by 7estatdef - 06-14-2012, 03:59 PM
RE: WHICH 690 IS BEST BET? - by Ron Ramirez - 06-14-2012, 08:45 PM
RE: WHICH 690 IS BEST BET? - by Arran - 06-14-2012, 09:41 PM
RE: WHICH 690 IS BEST BET? - by TA Forbes - 06-15-2012, 07:51 PM
RE: WHICH 690 IS BEST BET? - by Jayce - 06-15-2012, 08:00 PM
RE: WHICH 690 IS BEST BET? - by TA Forbes - 06-15-2012, 09:35 PM
RE: WHICH 690 IS BEST BET? - by Arran - 06-16-2012, 03:01 AM
RE: WHICH 690 IS BEST BET? - by Jayce - 06-16-2012, 03:44 PM
RE: WHICH 690 IS BEST BET? - by codefox1 - 06-16-2012, 11:41 PM
RE: WHICH 690 IS BEST BET? - by Sam samuelian - 06-19-2012, 01:09 PM
RE: WHICH 690 IS BEST BET? - by Ron Ramirez - 06-20-2012, 05:40 AM
RE: WHICH 690 IS BEST BET? - by Sam samuelian - 07-20-2012, 04:45 AM
RE: WHICH 690 IS BEST BET? - by PhilcoJohn - 07-20-2012, 07:10 PM
RE: WHICH 690 IS BEST BET? - by Ron Ramirez - 07-20-2012, 10:26 PM
RE: WHICH 690 IS BEST BET? - by Arran - 07-21-2012, 11:11 PM
RE: WHICH 690 IS BEST BET? - by Arran - 07-22-2012, 07:22 AM
RE: WHICH 690 IS BEST BET? - by Ron Ramirez - 07-22-2012, 08:14 AM
RE: WHICH 690 IS BEST BET? - by TA Forbes - 07-22-2012, 10:56 AM
RE: WHICH 690 IS BEST BET? - by Arran - 07-22-2012, 10:51 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM

[-]
Who's Online
There are currently 1052 online users. [Complete List]
» 2 Member(s) | 1050 Guest(s)
AvatarAvatar

>