Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

WHICH 690 IS BEST BET?
#25

Quote:While I agree with you, as the owner of this website and Phorum I also have to walk a fine line between enforcing rules and ticking people off. Make someone mad, they go over to the other forum, you never hear from them again. So I just depend on folks to be honest and to post when their item sells. Sale and wanted ads are pulled after 30 days here anyway, I see no need in archiving them forever as they do at ARF. To me, archiving all ads is a big waste of bandwidth and hard drive space.

That's not to bad if the ads are pulled after 30 days, but there aren't really that many ads to sort through most of the time. Craigslist has an expiry time too but given the quantity of postings it still becomes annoying. There was a G.E console for sale in my area, the ad was put up on the 19th of June, I asked if it was still for sale and the lady said it was, two days later she said her daughter had had taken it away while she was away that weekend. In any event the ad is still up there, I don't know why because it really isn't that hard to remove them, how lazy can you get? In any event I can't see the point in archiving buy and sell ads, as you say it's a total waste of hard drive space and for what?
Regards
Arran


Messages In This Thread
WHICH 690 IS BEST BET? - by Sam samuelian - 06-13-2012, 07:31 AM
RE: WHICH 690 IS BEST BET? - by codefox1 - 06-13-2012, 02:01 PM
RE: WHICH 690 IS BEST BET? - by Ron Ramirez - 06-13-2012, 04:41 PM
RE: WHICH 690 IS BEST BET? - by Sam samuelian - 06-13-2012, 04:50 PM
RE: WHICH 690 IS BEST BET? - by TA Forbes - 06-13-2012, 09:32 PM
RE: WHICH 690 IS BEST BET? - by Arran - 06-14-2012, 12:57 AM
RE: WHICH 690 IS BEST BET? - by 7estatdef - 06-14-2012, 03:59 PM
RE: WHICH 690 IS BEST BET? - by Ron Ramirez - 06-14-2012, 08:45 PM
RE: WHICH 690 IS BEST BET? - by Arran - 06-14-2012, 09:41 PM
RE: WHICH 690 IS BEST BET? - by TA Forbes - 06-15-2012, 07:51 PM
RE: WHICH 690 IS BEST BET? - by Jayce - 06-15-2012, 08:00 PM
RE: WHICH 690 IS BEST BET? - by TA Forbes - 06-15-2012, 09:35 PM
RE: WHICH 690 IS BEST BET? - by Arran - 06-16-2012, 03:01 AM
RE: WHICH 690 IS BEST BET? - by Jayce - 06-16-2012, 03:44 PM
RE: WHICH 690 IS BEST BET? - by codefox1 - 06-16-2012, 11:41 PM
RE: WHICH 690 IS BEST BET? - by Sam samuelian - 06-19-2012, 01:09 PM
RE: WHICH 690 IS BEST BET? - by Ron Ramirez - 06-20-2012, 05:40 AM
RE: WHICH 690 IS BEST BET? - by Sam samuelian - 07-20-2012, 04:45 AM
RE: WHICH 690 IS BEST BET? - by PhilcoJohn - 07-20-2012, 07:10 PM
RE: WHICH 690 IS BEST BET? - by Ron Ramirez - 07-20-2012, 10:26 PM
RE: WHICH 690 IS BEST BET? - by Arran - 07-21-2012, 11:11 PM
RE: WHICH 690 IS BEST BET? - by Arran - 07-22-2012, 07:22 AM
RE: WHICH 690 IS BEST BET? - by Ron Ramirez - 07-22-2012, 08:14 AM
RE: WHICH 690 IS BEST BET? - by TA Forbes - 07-22-2012, 10:56 AM
RE: WHICH 690 IS BEST BET? - by Arran - 07-22-2012, 10:51 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM

[-]
Who's Online
There are currently 844 online users. [Complete List]
» 1 Member(s) | 843 Guest(s)
Avatar

>