orig Philco chassis/cabinet retrofits?

Register

Guest Join Us

Hello Guest,

Please feel free to join us!
There are many more parts of the Phorum that only members can see.

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

orig Philco chassis/cabinet retrofits?

Ron Ramirez
Silent Key

Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand State, Province, Country: Indiana

#2

06-13-2007, 06:56 AM

Hi Randal

YES to all of your questions above. The 37-630X chassis will fit a 37-610B tombstone cabinet just fine, and the 37-630T escutcheon should fit a 37-610B cabinet as well.

I noticed you are wanting to find a 37-630T cabinet. I should warn you that your chassis might not fit that cabinet, because the 37-630T chassis was modified to place the rectifier tube next to the 6F6G output instead of on top of the power transformer due to the greatly reduced available space in the 37-630T cabinet. Ditto the 37-610T cabinet. You would have to replace the power transformer and add an octal socket on the chassis next to the 6F6G for the 5Y4G rectifier in order to put your chassis in a 37-610T or 37-630T cabinet.

--
Ron Ramirez
Ferdinand IN

Find

« Next Oldest | Next Newest »

Messages In This Thread

orig Philco chassis/cabinet retrofits? - by Texasrocker - 06-13-2007, 01:37 AM

[No subject] - by Ron Ramirez - 06-13-2007, 06:56 AM

[No subject] - by Texasrocker - 06-13-2007, 01:17 PM

[No subject] - by Texasrocker - 06-15-2007, 10:04 PM

[No subject] - by Ron Ramirez - 06-17-2007, 01:09 AM

[No subject] - by Ron Ramirez - 06-19-2007, 12:02 AM

[No subject] - by Texasrocker - 06-19-2007, 10:24 PM

[No subject] - by Texasrocker - 06-26-2007, 10:41 PM

View a Printable Version

Users browsing this thread: 1 Guest(s)

Recent Posts
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM

Who's Online

There are currently 957 online users. [Complete List]
» 1 Member(s) | 956 Guest(s)