Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

How to identify and choose veneer
#5

I still haven't found a canadian website for Mohawks. If you know of one, I am all ears. They won't sell to Canada because of import regulations.
And so far I haven't found a local supplier either.

The problem is, very soon it will be too cold outside to do any work. When the finishing products freeze before drying, there's a problem. And I'd like to get the radio back all together before winter time, to prevent any damage to the chassis or cabinet.

I still have about a month or so for that, and I can expect 2-3 weeks shipping, so I am running short.

-Mars


Messages In This Thread
How to identify and choose veneer - by Marsupial - 09-24-2012, 01:05 PM
RE: How to identify and choose veneer - by Arran - 09-24-2012, 05:39 PM
RE: How to identify and choose veneer - by Arran - 09-25-2012, 08:14 PM
RE: How to identify and choose veneer - by Marsupial - 09-25-2012, 09:17 PM
RE: How to identify and choose veneer - by Arran - 09-25-2012, 10:14 PM
RE: How to identify and choose veneer - by Arran - 09-29-2012, 12:41 AM



Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM
Testing a speaker and output transformer Trutone A2-G
morzh Short-circuited turns can be considered as a half-dead transformer. But on this case transformer will hot and s...Vlad95 — 11:01 AM
Testing a speaker and output transformer Trutone A2-G
I am not sure how a transformer could be weak. It could be inadequate, but only when you replace the original with somet...morzh — 09:56 AM

[-]
Who's Online
There are currently 2249 online users. [Complete List]
» 5 Member(s) | 2244 Guest(s)
AvatarAvatarAvatarAvatar
Avatar

>