Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

1936? model 84 resistor
#25

Much obliged, Terry. This is the first regen set I've attempted to
restore. I need all the tutoring I can get. The people on here are
most helpful with their knowledge.
Maybe you can bring me up to speed on the Philco model numbering
system. From the posts I've read, the first 2 digits of the model
number are the year of manufacture? I had no idea what my model
number was until I looked at pics in the gallery. My set has a sticker
on the left rear of chassis with Philco patent numbers. There is a
stamped number on right center G83118--probably a serial #.
Nothing else to ID it.
Anyway, thanks. Jim


Messages In This Thread
1936? model 84 resistor - by brownie45 - 01-22-2013, 03:48 PM
RE: 1936? model 84 resistor - by Ron Ramirez - 01-22-2013, 07:30 PM
RE: 1936? model 84 resistor - by brownie45 - 01-22-2013, 09:10 PM
RE: 1936? model 84 resistor - by 7estatdef - 01-26-2013, 09:30 AM
RE: 1936? model 84 resistor - by Ron Ramirez - 01-26-2013, 10:02 AM
RE: 1936? model 84 resistor - by Ron Ramirez - 01-26-2013, 10:03 AM
RE: 1936? model 84 resistor - by brownie45 - 01-26-2013, 02:50 PM
RE: 1936? model 84 resistor - by codefox1 - 01-26-2013, 03:18 PM
RE: 1936? model 84 resistor - by Ron Ramirez - 01-26-2013, 07:19 PM
RE: 1936? model 84 resistor - by brownie45 - 01-26-2013, 09:04 PM
RE: 1936? model 84 resistor - by Ron Ramirez - 01-26-2013, 09:10 PM
RE: 1936? model 84 resistor - by 7estatdef - 01-26-2013, 09:10 PM
RE: 1936? model 84 resistor - by Ron Ramirez - 01-26-2013, 09:12 PM
RE: 1936? model 84 resistor - by brownie45 - 01-26-2013, 10:41 PM
RE: 1936? model 84 resistor - by 7estatdef - 01-27-2013, 09:59 AM
RE: 1936? model 84 resistor - by brownie45 - 01-28-2013, 04:55 PM
RE: 1936? model 84 resistor - by 7estatdef - 01-28-2013, 11:48 PM
RE: 1936? model 84 resistor - by brownie45 - 01-29-2013, 07:38 AM
RE: 1936? model 84 resistor - by Ron Ramirez - 01-29-2013, 10:52 AM
RE: 1936? model 84 resistor - by brownie45 - 01-29-2013, 02:40 PM
RE: 1936? model 84 resistor - by klondike98 - 01-29-2013, 03:00 PM
RE: 1936? model 84 resistor - by Ron Ramirez - 01-29-2013, 03:16 PM
RE: 1936? model 84 resistor - by brownie45 - 01-29-2013, 03:26 PM
RE: 1936? model 84 resistor - by 7estatdef - 01-29-2013, 05:37 PM
RE: 1936? model 84 resistor - by brownie45 - 01-29-2013, 06:39 PM
RE: 1936? model 84 resistor - by 7estatdef - 01-29-2013, 08:48 PM
RE: 1936? model 84 resistor - by brownie45 - 02-01-2013, 03:49 PM
RE: 1936? model 84 resistor - by brownie45 - 02-01-2013, 04:37 PM
RE: 1936? model 84 resistor - by 7estatdef - 02-01-2013, 11:00 PM
RE: 1936? model 84 resistor - by brownie45 - 02-02-2013, 08:10 AM
RE: 1936? model 84 resistor - by 7estatdef - 02-03-2013, 10:07 PM
RE: 1936? model 84 resistor - by brownie45 - 02-04-2013, 08:01 AM
RE: 1936? model 84 resistor - by 7estatdef - 02-04-2013, 10:00 AM
RE: 1936? model 84 resistor - by brownie45 - 02-04-2013, 11:19 AM



Users browsing this thread:
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM

[-]
Who's Online
There are currently 860 online users. [Complete List]
» 1 Member(s) | 859 Guest(s)
Avatar

>