[winkydink]

Well it turns out that the speaker on the 48-200 was attached by a home brewed method of using the 2 screw holes at the bottom of the speaker, with non philco supplied brackets.

I looked back at a photo of a 48-200 that I restored and gave away for christmas and the speaker is not attached that way.

There are holes in the 48-200 chassis for the bracket on the 47-204 speaker and it fits like a glove. So that problem is solved.

The final issue I have is that 3rd GREEN wire which was attached to the chassis on the 47-204 at 1 end and to an inner connection point near the cone on the speaker.

Q: should I attache this green wire the same way it was connected on the 47-204 ?????

Thanks again.