[Ron Ramirez]

I've cut the steel into four pieces of equal length, and have drilled a hole in one end of each. I assembled the steel arms to the tweeter and did a test fit on the woofer.

Whew! I cut them long enough! You know what they say about measure twice, cut once...

I then removed the arms from the tweeter and put both tweeter and woofer back into their protective cardboard.

Tomorrow, I'll drill holes in the other end of each arm for mounting onto the woofer. I'll also have to pick up four more screws - the ones I have are too short for mounting the arms to the woofer, but perfect for mounting the arms to the tweeter.

Will post some pictures soon. If nothing else, this coaxial speaker will look good...