Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

philco ford radio ft 6
#5

This is my first post so I am new at this. I also have the FT-6 like Roger has. It is for an open '35 Ford of mine. I also happen to have the enclosed car version of the FT-6. I am taking the open car radio to the repair man today. I had an enlarged schematic that I have missplaced here at the house and was wondering if I can download one somewhere.

I don't have a speaker for the enclosed radio like Roger posted the pictures. I need to find one and would appreciate any lead in that regard. I actually don't know what I am looking for.

The enclosed version has all the schematic and parts lists inside the back cover but it is small.

Thank you,

Ken in Texas


Messages In This Thread
philco ford radio ft 6 - by rogergurney - 01-20-2013, 09:27 AM
RE: philco ford radio ft 6 - by BILL - 01-28-2013, 05:36 PM
RE: philco ford radio ft 6 - by rogergurney - 01-30-2013, 03:21 PM
RE: philco ford radio ft 6 - by rogergurney - 01-30-2013, 03:24 PM
RE: philco ford radio ft 6 - by drkbp - 03-09-2013, 10:18 AM
RE: philco ford radio ft 6 - by drkbp - 03-09-2013, 10:36 AM



Users browsing this thread:
[-]
Recent Posts
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM

[-]
Who's Online
There are currently no members online.

>