38-116 died the 3rd time! Guidance Please?

Register

Guest Join Us

Hello Guest,

Please feel free to join us!
There are many more parts of the Phorum that only members can see.

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

38-116 died the 3rd time! Guidance Please?

jerryhawthorne
Phorum Expert

Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA

#5

03-16-2013, 08:59 PM

Well, got back to the radio this evening and with the great guidance, did a little resistance checking. The #40 resistor looked good, went to the cadohm and INDEED, the 14K section was open! Kudos to MAD. Strange that the 1K section is quite long compared to the 14K (open) section. At any rate, the only 5watt resistor I had was a 10K and jumped across the open 14K and brought up the variac slowly and indeed I'm getting some plate voltage on the Oscillator.
I'm going to replace the cadohm and install a couple of dale type resistors, can anyone give me an idea of the wattage required? I'm dumb at that stuff.
Thanks for your help. Your great!
Jerry

A friend in need is a pest! Bill Slee ca 1970.

Find

« Next Oldest | Next Newest »

Messages In This Thread

38-116 died the 3rd time! Guidance Please? - by jerryhawthorne - 03-15-2013, 09:38 PM

RE: 38-116 died! - by 7estatdef - 03-15-2013, 10:13 PM

RE: 38-116 died! - by BrendaAnnD - 03-15-2013, 10:23 PM

RE: 38-116 died! - by jerryhawthorne - 03-15-2013, 10:29 PM

RE: 38-116 died! - by jerryhawthorne - 03-16-2013, 08:59 PM

RE: 38-116 died! - by jerryhawthorne - 03-17-2013, 05:51 PM

RE: 38-116 died! - by morzh - 03-17-2013, 07:57 PM

RE: 38-116 died! - by jerryhawthorne - 03-17-2013, 08:28 PM

RE: 38-116 died! - by morzh - 03-17-2013, 09:07 PM

RE: 38-116 died! - by jerryhawthorne - 03-17-2013, 09:09 PM

RE: 38-116 died! - by morzh - 03-17-2013, 09:14 PM

RE: 38-116 died! - by jerryhawthorne - 03-17-2013, 09:45 PM

RE: 38-116 died! - by morzh - 03-17-2013, 10:00 PM

RE: 38-116 died! - by morzh - 03-17-2013, 10:12 PM

RE: 38-116 died! - by jerryhawthorne - 03-17-2013, 11:05 PM

RE: 38-116 died! - by morzh - 03-18-2013, 09:36 AM

RE: 38-116 died! - by jerryhawthorne - 03-18-2013, 02:35 PM

RE: 38-116 died! Oh no, died again. Help - by jerryhawthorne - 03-26-2013, 06:44 PM

RE: 38-116 died! Oh no, died again. Help - by TimC - 03-26-2013, 07:32 PM

RE: 38-116 died! Oh no, died again. Help - by jerryhawthorne - 03-26-2013, 08:21 PM

RE: 38-116 died! Oh no, died again. Help - by morzh - 03-26-2013, 08:41 PM

RE: 38-116 died! Oh no, died again. Help - by BrendaAnnD - 03-26-2013, 08:47 PM

RE: 38-116 died! Oh no, died again. Help - by jerryhawthorne - 03-26-2013, 09:37 PM

RE: 38-116 died! Oh no, died again. Help - by BrendaAnnD - 03-26-2013, 09:44 PM

RE: 38-116 died! Oh no, died again. Help - by jerryhawthorne - 03-27-2013, 01:47 AM

RE: 38-116 died! Oh no, died again. Help - by BrendaAnnD - 03-27-2013, 01:52 AM

RE: 38-116 died! Oh no, died again. Help - by morzh - 03-27-2013, 12:19 PM

RE: 38-116 died! Oh no, died again. Help - by jerryhawthorne - 03-27-2013, 02:43 PM

RE: 38-116 died! Oh no, died again. Help - by jerryhawthorne - 03-27-2013, 07:25 PM

RE: 38-116 died the 3rd time! Guidance Please? - by jerryhawthorne - 03-29-2013, 08:46 PM

RE: 38-116 died the 3rd time! Guidance Please? - by morzh - 03-29-2013, 10:35 PM

RE: 38-116 died the 3rd time! Guidance Please? - by BrendaAnnD - 03-29-2013, 10:41 PM

RE: 38-116 died the 3rd time! Guidance Please? - by morzh - 03-29-2013, 10:46 PM

RE: 38-116 died the 3rd time! Guidance Please? - by jerryhawthorne - 03-30-2013, 12:42 AM

RE: 38-116 died the 3rd time! Guidance Please? - by morzh - 03-30-2013, 12:06 PM

RE: 38-116 died the 3rd time! Guidance Please? - by jerryhawthorne - 03-30-2013, 02:39 PM

RE: 38-116 died the 3rd time! Guidance Please? - by morzh - 03-30-2013, 04:07 PM

RE: 38-116 died the 3rd time! Guidance Please? - by jerryhawthorne - 03-30-2013, 10:40 PM

RE: 38-116 died the 3rd time! Guidance Please? - by morzh - 03-30-2013, 11:10 PM

RE: 38-116 died the 3rd time! Guidance Please? - by jerryhawthorne - 03-30-2013, 11:42 PM

View a Printable Version

Users browsing this thread: 1 Guest(s)

Recent Posts
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM

Who's Online

There are currently 668 online users. [Complete List]
» 1 Member(s) | 667 Guest(s)