Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 2 Vote(s) - 4.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

47-1230 Capacitors
#1

I need to rebiuld the receiver on my Philco 47-1230. I have a couple im sure, simple, questions. I read that mmf is the same as a pf capacitor, in other words if the schematic says 22mmf then it is a 22 pf in todays standards, is that correct? Also, it looks like you don't usually need to replace any mica capacitors when recapping a unit. This radio made through a house fire although it didn't actually catch on fire it got VERY hot and the capacitors look like they have been subjected to a lot of heat. Thing is I dont see any that look like a mica capacitor anyway, does anyone know if this set actually has any mica capacitors in it or not that I just don't reconize on this old set? I am planning on replacing pretty much all components (capacitors, resistors,etc) in it except transformers, adj capacitors, etc that seem good because of the heat it was subjected to. Any tips or opinions on this please let me know and thanks for your time replying to this.


Messages In This Thread
47-1230 Capacitors - by Warren - 07-03-2013, 02:19 PM
RE: 47-1230 Capacitors - by exray - 07-04-2013, 06:27 AM
RE: 47-1230 Capacitors - by morzh - 07-04-2013, 11:26 AM
RE: 47-1230 Capacitors - by codefox1 - 07-04-2013, 11:38 AM
RE: 47-1230 Capacitors - by Warren - 07-04-2013, 06:15 PM
RE: 47-1230 Capacitors - by Mondial - 07-04-2013, 06:28 PM
RE: 47-1230 Capacitors - by Warren - 07-04-2013, 07:07 PM
RE: 47-1230 Capacitors - by Mondial - 07-04-2013, 07:54 PM
RE: 47-1230 Capacitors - by morzh - 07-04-2013, 08:00 PM
RE: 47-1230 Capacitors - by Mondial - 07-04-2013, 08:15 PM
RE: 47-1230 Capacitors - by morzh - 07-04-2013, 09:04 PM
RE: 47-1230 Capacitors - by Warren - 07-04-2013, 10:51 PM
RE: 47-1230 Capacitors - by morzh - 07-05-2013, 12:20 PM
RE: 47-1230 Capacitors - by Warren - 07-08-2013, 01:46 PM
RE: 47-1230 Capacitors - by morzh - 07-08-2013, 08:11 PM
RE: 47-1230 Capacitors - by Warren - 07-08-2013, 08:44 PM
RE: 47-1230 Capacitors - by Warren - 07-19-2013, 01:45 PM
RE: 47-1230 Capacitors - by Chuck Schwark - 07-19-2013, 02:12 PM
RE: 47-1230 Capacitors - by Warren - 07-19-2013, 02:28 PM
RE: 47-1230 Capacitors - by codefox1 - 07-19-2013, 03:02 PM
RE: 47-1230 Capacitors - by Warren - 07-19-2013, 08:24 PM
RE: 47-1230 Capacitors - by BrendaAnnD - 07-19-2013, 09:18 PM
RE: 47-1230 Capacitors - by Warren - 07-19-2013, 11:37 PM
RE: 47-1230 Capacitors - by BrendaAnnD - 07-20-2013, 12:59 AM
RE: 47-1230 Capacitors - by Mondial - 07-20-2013, 09:02 AM
RE: 47-1230 Capacitors - by Warren - 07-20-2013, 05:02 PM
RE: 47-1230 Capacitors - by Mondial - 07-20-2013, 11:46 PM
RE: 47-1230 Capacitors - by Warren - 07-21-2013, 01:25 AM
RE: 47-1230 Capacitors - by Warren - 01-20-2014, 12:38 AM
RE: 47-1230 Capacitors - by Warren - 01-21-2014, 12:58 AM
RE: 47-1230 Capacitors - by Marsupial - 01-22-2014, 03:44 PM
RE: 47-1230 Capacitors - by Warren - 01-22-2014, 03:58 PM
RE: 47-1230 Capacitors - by Marsupial - 01-23-2014, 05:34 PM
RE: 47-1230 Capacitors - by Raleigh - 01-24-2014, 12:12 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM

[-]
Who's Online
There are currently no members online.

>