Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

What voltages were the original electrolytics on Philco's 1928-1933
#5

Quote:Hi All;
Jon, is that B1 or D1 (I can't tell from the picture) Telephone, in working order or is it just for Display with the other Radios ?? It looks nice, I have a D1 with a later Handset, that I use on a daily Basis..
THANK YOU Marty


Marty that is a working Western Electric D1 with a matching handset. I also have a 302 and a real old 40AL candlestick with ringer. I use all three, in fact I just called my Aunt from Wyoming on the D1 a hour ago, Western electric made amazing phones and the sound quality is second to non in my opinion.

Morzh, thanks for your reply that answers my questions, I went with 600v ratings for the electrolytics on a Philco 80 Jr. I will be restoring soon after I can finalize this 71B that has been giving me so much trouble lately.

Thanks

Jon


Messages In This Thread
RE: What voltages were the original electrolytics on Philco's 1928-1933 - by Philco281989 - 07-06-2013, 06:45 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM

[-]
Who's Online
There are currently 952 online users. [Complete List]
» 2 Member(s) | 950 Guest(s)
AvatarAvatar

>