[Joeztech]

Today I took more wood part out of the cabinet. The vertical ribs in the grill area come out by removing screws at the top and bottom from the rear. Then I did some light sanding of the chassis shelf. It had been drying out after use of the "OFF" product for days. I removed the two side grill boards and cloth. These are just appearance items. No speaker mounts there. I then cleaned more parts of the cabinet interior. Once I had done as much cleaning as I could, I used some shellac I bought yesterday to coat the inside surfaces of the cabinet. This will seal off any lingering rodent odor.

I have to say that the OFF product really does a good job of eliminating the odor. It is important to not allow any of it to get on the exterior finish of the cabinet.

Joe