Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 2 Vote(s) - 4.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

47-1230 Capacitors
#29

Well. I'm Happy to report after replacing the Caps and most resistors My tuner is receiving both AM and FM stations. Icon_biggrin Icon_biggrin Icon_biggrin Didn't get anything on the SW band but not sure if it just needs an alignment and maybe a better antenna to receive anything (maybe there just wasn't anybody out there, don't know), what do you think? Also, is there anything besides doing an alignment that I should do since it is receiving stations? Should I check the different voltages or because it is receiving well I shouldn't worry about anything except doing an alignment? Then, to get it all back together and looking good with new dial glass, etc and finish the cabinet. I want to thank everyone for their help, it probably wouldn't be working this far without all of your help. Warren


Messages In This Thread
47-1230 Capacitors - by Warren - 07-03-2013, 02:19 PM
RE: 47-1230 Capacitors - by exray - 07-04-2013, 06:27 AM
RE: 47-1230 Capacitors - by morzh - 07-04-2013, 11:26 AM
RE: 47-1230 Capacitors - by codefox1 - 07-04-2013, 11:38 AM
RE: 47-1230 Capacitors - by Warren - 07-04-2013, 06:15 PM
RE: 47-1230 Capacitors - by Mondial - 07-04-2013, 06:28 PM
RE: 47-1230 Capacitors - by Warren - 07-04-2013, 07:07 PM
RE: 47-1230 Capacitors - by Mondial - 07-04-2013, 07:54 PM
RE: 47-1230 Capacitors - by morzh - 07-04-2013, 08:00 PM
RE: 47-1230 Capacitors - by Mondial - 07-04-2013, 08:15 PM
RE: 47-1230 Capacitors - by morzh - 07-04-2013, 09:04 PM
RE: 47-1230 Capacitors - by Warren - 07-04-2013, 10:51 PM
RE: 47-1230 Capacitors - by morzh - 07-05-2013, 12:20 PM
RE: 47-1230 Capacitors - by Warren - 07-08-2013, 01:46 PM
RE: 47-1230 Capacitors - by morzh - 07-08-2013, 08:11 PM
RE: 47-1230 Capacitors - by Warren - 07-08-2013, 08:44 PM
RE: 47-1230 Capacitors - by Warren - 07-19-2013, 01:45 PM
RE: 47-1230 Capacitors - by Chuck Schwark - 07-19-2013, 02:12 PM
RE: 47-1230 Capacitors - by Warren - 07-19-2013, 02:28 PM
RE: 47-1230 Capacitors - by codefox1 - 07-19-2013, 03:02 PM
RE: 47-1230 Capacitors - by Warren - 07-19-2013, 08:24 PM
RE: 47-1230 Capacitors - by BrendaAnnD - 07-19-2013, 09:18 PM
RE: 47-1230 Capacitors - by Warren - 07-19-2013, 11:37 PM
RE: 47-1230 Capacitors - by BrendaAnnD - 07-20-2013, 12:59 AM
RE: 47-1230 Capacitors - by Mondial - 07-20-2013, 09:02 AM
RE: 47-1230 Capacitors - by Warren - 07-20-2013, 05:02 PM
RE: 47-1230 Capacitors - by Mondial - 07-20-2013, 11:46 PM
RE: 47-1230 Capacitors - by Warren - 07-21-2013, 01:25 AM
RE: 47-1230 Capacitors - by Warren - 01-20-2014, 12:38 AM
RE: 47-1230 Capacitors - by Warren - 01-21-2014, 12:58 AM
RE: 47-1230 Capacitors - by Marsupial - 01-22-2014, 03:44 PM
RE: 47-1230 Capacitors - by Warren - 01-22-2014, 03:58 PM
RE: 47-1230 Capacitors - by Marsupial - 01-23-2014, 05:34 PM
RE: 47-1230 Capacitors - by Raleigh - 01-24-2014, 12:12 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 42-345 Restoration/Repair
Ok MrFixr55,  I have tried the DeoxIT D5 on the band switch and even though it has relieved the tension I felt when turn...osanders0311 — 11:11 AM
Part numbers to model cross
Is there a reference somewhere where you can punch in Philco part numbers and see what models those parts were used in?Jim Dutridge — 10:17 AM
Philco 42-345 Restoration/Repair
Hi OSanders, Look carefully at the band switch. Turn it slowly and "wiggle" it around the desired band. ...MrFixr55 — 12:33 AM
5U4 vs 5Z4 tubes
I think that RCA and GE introduced metal tubes in the USA in 1936.  I don't know if they were being made by RCA, GE or b...MrFixr55 — 11:20 PM
Philco 42-345 Restoration/Repair
Vlad95, Thank you for the stringing guides and wow there are so manyosanders0311 — 06:01 PM
5U4 vs 5Z4 tubes
A pre war Hallicrafters, and an early one too, very nice! 1936 is pretty early for metal tubes too, which would explain ...Arran — 05:58 PM
Philco 42-345 Restoration/Repair
Thanks Rod, "When you hear the background hiss and no station it usually indicates that the oscillator quit" ...osanders0311 — 05:52 PM
Philco 42-345 Restoration/Repair
RodB :beerchug:Vlad95 — 10:22 AM
Philco 42-345 Restoration/Repair
Vlad, you nailed it. Swiss and German roots.RodB — 09:54 AM
5U4 vs 5Z4 tubes
Well this is a Hallicrafters SX/9 circa 1936. No real issues so far although I dodged a real bullet with a cap that was...bridkarl — 07:59 AM

[-]
Who's Online
There are currently no members online.

>