Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

41-290 Faceplate Color
#3

Have you looked at the 41 pictures http://www.philcoradio.com/gallery/1941a.htm

I just got what looks the same as yours for my 41-280 and my original is warped & cracked but would guess there was a bit of differences in the originals also.

The pictures of the 41s look like there was a fair difference, but may be just the photo taking.

What did you use to clean up your brass strip? Looks good. I don't want to mess mine up cleaning.

I used GoJo on the station calls for the push buttons and the 3 little clear covers I have.

Have you found any links on what is being used to gin up new push button call letters?


Messages In This Thread
41-290 Faceplate Color - by Todd Kaser - 03-31-2014, 12:48 PM
RE: 41-290 Faceplate Color - by Todd Kaser - 03-31-2014, 12:48 PM
RE: 41-290 Faceplate Color - by K7Sparky - 04-01-2014, 05:45 PM
RE: 41-290 Faceplate Color - by Todd Kaser - 04-02-2014, 07:27 AM
RE: 41-290 Faceplate Color - by Todd Kaser - 04-02-2014, 08:17 AM
RE: 41-290 Faceplate Color - by K7Sparky - 04-02-2014, 08:32 AM
RE: 41-290 Faceplate Color - by Todd Kaser - 04-02-2014, 11:33 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM

[-]
Who's Online
There are currently 2771 online users. [Complete List]
» 3 Member(s) | 2768 Guest(s)
AvatarAvatarAvatar

>