The Fisher 700-T Receiver
Posts: 5
Threads: 0
Joined: Apr 2014
City: Los Angeles, CA
I have a few questions I wish to pose, how come you decided to change the 3A120's, how do you replace C30 (200uF) at the main switch, why do you wish to replace the TR1009 output transistors, and why do you have issues with NTE?
I began the resurrection of my 700T, this week.
To hold the surface mount capacitors, I am using sectioned PVC tubing and thin foam rubber, to hold each cap. The reason is, I don't believe receivers as such, need to adhere to aesthetics, over ability to see the replacement capacitor. My belief is, that they should be completely serviced than, restored.
Attached Files
Image(s)
(This post was last modified: 04-17-2014, 12:14 PM by
Omer .)
Messages In This Thread
RE: The Fisher 700-T Receiver - by Omer - 04-17-2014, 04:07 AM
Users browsing this thread: 3 Guest(s)
Recent Posts
PT 6 chassis screws size???
Hello bridKarl,
that sounds right or maybe 8/32 .
Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws.
It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord,
Well done on rewinding that coil it turned fairly good for your first one.
Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work.
I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load.
If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Who's Online
There are currently no members online.