Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Coil rewinding?
#6

I doubt there is anything wrong with the RF coil. If the coil were to have shorted turns, the inductance would decrease not increase. Therefore you would need more compensator capacity, not less.

Is there anything else connected to the RF coil tuned circuit which would increase the stray capacity?

The other possibility is that the oscillator is running a higher freq than required to track the RF stage. You might try increasing the capacitance of the osc high freq compensator slightly. This would require you to tune the same station in with less tuning cap capacity, which would correspondingly reduce the RF stage tuning capacity. Then the RF compensator could be reassembled adding a small additional capacitance to achieve resonance.


Messages In This Thread
Coil rewinding? - by fields 100 - 05-21-2014, 08:39 AM
RE: Coil rewinding? - by morzh - 05-21-2014, 09:36 AM
RE: Coil rewinding? - by fields 100 - 05-21-2014, 10:27 AM
RE: Coil rewinding? - by morzh - 05-21-2014, 10:58 AM
RE: Coil rewinding? - by fields 100 - 05-22-2014, 04:28 PM
RE: Coil rewinding? - by Mondial - 05-22-2014, 05:06 PM
RE: Coil rewinding? - by morzh - 05-22-2014, 05:21 PM
RE: Coil rewinding? - by fields 100 - 05-22-2014, 06:26 PM
RE: Coil rewinding? - by fields 100 - 05-22-2014, 07:35 PM
RE: Coil rewinding? - by Mondial - 05-22-2014, 08:24 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Model 70 Cabinet Trim
musar , Well if you have any more questions feel free to post away . Sincerely Richardradiorich — 08:56 PM
Model 70 Cabinet Trim
Although I have not made any cabinets or cabinet parts for a couple of years, I still have some parts left over, includi...Steve Davis — 06:26 PM
philcorepairbench.com - shadow-meter
Thanks Ron.fenbach — 02:43 PM
Model 70 Cabinet Trim
Thank you, Gary. Before making my original post, I had clicked on "Steve Davis Cabinets" only to find that it...musar — 02:25 PM
philco predicta
Welcome to the Phorum, cgl18! I am not your resource for television repair, but lots of friendly help is available here...GarySP — 02:12 PM
Model 70 Cabinet Trim
Welcome to the Phorum, musar! You can send Steve Davis a private message (PM). The site is at the top of the Home page...GarySP — 02:09 PM
Model 70 Cabinet Trim
How do I contact him? The only contact information for him I could find when searching online was a telephone number th...musar — 10:38 AM
philco predicta
Hello, good afternoon, I would like to ask what the possible problem could be if I don't have an image on the screen. I ...cgl18 — 10:19 AM
Philco model 38 code 121 not receiving signal.
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage! Ron462ron — 07:20 AM

[-]
Who's Online
There are currently 535 online users. [Complete List]
» 1 Member(s) | 534 Guest(s)
Avatar

>