Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Have just bought backelite 38-12.
#1

http://www.ebay.com/itm/1938-Philco-Earl...true&rt=nc

Just bought this backelite Philco 38-12 (wanted it for a while, this one is clean and the cabinet is intact). And I think the price is very reasonable.
Note: the lines on the glass are light, not cracks.

Here's what I wrote to the seller. If after this the radio comes damaged, I will lose my faith in peope Icon_lol . Seriously.


.......
Now, please do pay attention to instructions below.

This is a backelite radio.
I do not know if you have experience packing old radios, the backelite ones require extra care.

1. make sure nothing is loose inside.
2. if possible turn the tuning knob so the variable capacitor inside has its rotor blades fully inside stator.
3. wrap well in plastic wrap.
4. use a first box to fit the wrapped radio snuggly enough so it does not bounce and tape the box over.
5. use the second box oversized at least two inches in each dimension (2" has to be between EVERY wall of the box and the first box with the radio inside) and fill all these spacing with peanuts, first on the bottom, then sides and then the top. The peanuts have to be ttight enough so not to end up on top and radio on the unprotected bottom due to shaking in delivery.

Remember, the package WILL be dropped and abused, and backelite is easily craked unlike wood.
If it is craked, it goes back. I hope it will not have to. I have just received a radio from a guy who I gave exact instructions which he disregarded, and then blamed UPS when it arrived destroyed (I am in the middle of the case resolution right now). Let's try to avoid that.

Best regards,

Morzh.


PS. I know I sound here as a paranoid nudnik and all...it is better than have another case opened with eBay returning the item.


Messages In This Thread
Have just bought backelite 38-12. - by morzh - 07-22-2014, 11:33 AM
RE: Have just bought backelite 38-12. - by Squire - 07-22-2014, 12:19 PM
RE: Have just bought backelite 38-12. - by morzh - 07-22-2014, 01:49 PM
RE: Have just bought backelite 38-12. - by Squire - 07-22-2014, 03:49 PM
RE: Have just bought backelite 38-12. - by morzh - 07-22-2014, 04:01 PM
RE: Have just bought backelite 38-12. - by morzh - 07-23-2014, 09:42 AM
RE: Have just bought backelite 38-12. - by Jayce - 07-23-2014, 03:33 PM
RE: Have just bought backelite 38-12. - by morzh - 07-23-2014, 03:51 PM
RE: Have just bought backelite 38-12. - by morzh - 07-23-2014, 03:52 PM
RE: Have just bought backelite 38-12. - by GarySP - 07-24-2014, 08:42 AM
RE: Have just bought backelite 38-12. - by morzh - 07-24-2014, 09:45 AM
RE: Have just bought backelite 38-12. - by wa2ise - 07-24-2014, 05:01 PM
RE: Have just bought backelite 38-12. - by morzh - 07-24-2014, 08:58 PM
RE: Have just bought backelite 38-12. - by Warren - 07-24-2014, 11:01 PM
RE: Have just bought backelite 38-12. - by morzh - 07-25-2014, 10:03 AM
RE: Have just bought backelite 38-12. - by Squire - 07-25-2014, 10:57 AM
RE: Have just bought backelite 38-12. - by morzh - 07-25-2014, 11:29 AM
RE: Have just bought backelite 38-12. - by Warren - 07-25-2014, 01:49 PM
RE: Have just bought backelite 38-12. - by morzh - 07-25-2014, 02:32 PM
RE: Have just bought backelite 38-12. - by morzh - 07-31-2014, 02:53 PM
RE: Have just bought backelite 38-12. - by morzh - 07-31-2014, 05:29 PM
RE: Have just bought backelite 38-12. - by Arran - 07-31-2014, 08:54 PM
RE: Have just bought backelite 38-12. - by morzh - 08-01-2014, 03:41 PM
RE: Have just bought backelite 38-12. - by morzh - 08-01-2014, 06:36 PM
RE: Have just bought backelite 38-12. - by morzh - 08-01-2014, 08:09 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM

[-]
Who's Online
There are currently 2777 online users. [Complete List]
» 3 Member(s) | 2774 Guest(s)
AvatarAvatarAvatar

>