Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

unknown radio
#8

Unfortunately , casi totality of sellers say: " I plugged it on the mains , the lamps light " ( generally the front screen small lights!!) , and " the radio snores " or " the radio whistles" , or " no sound can be heared " , and unfortunately too , sometimes , it' s too late ...
Generally too , they have not verified the fuse is on the right position ( 230 V ) and has not been replaced with a simple bit or copper wire ...

Not same in the states ???


Messages In This Thread
unknown radio - by claude.france - 09-08-2014, 10:02 AM
RE: unknown radio - by klondike98 - 09-08-2014, 04:55 PM
RE: unknown radio - by morzh - 09-08-2014, 07:16 PM
RE: unknown radio - by Ron Ramirez - 09-08-2014, 08:03 PM
RE: unknown radio - by Arran - 09-09-2014, 02:23 AM
RE: unknown radio - by claude.france - 09-09-2014, 04:45 AM
RE: unknown radio - by klondike98 - 09-09-2014, 12:35 PM
RE: unknown radio - by claude.france - 09-09-2014, 03:07 PM
RE: unknown radio - by Ron Ramirez - 09-09-2014, 03:54 PM
RE: unknown radio - by klondike98 - 09-09-2014, 05:00 PM
RE: unknown radio - by Arran - 09-09-2014, 09:57 PM
RE: unknown radio - by claude.france - 09-10-2014, 03:49 AM
RE: unknown radio - by claude.france - 09-10-2014, 07:57 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM

[-]
Who's Online
There are currently 745 online users. [Complete List]
» 1 Member(s) | 744 Guest(s)
Avatar

>