[Ron Ramirez]

Thanks, Chuck!

Here's what was accomplished today.

First, I finished restuffing the three-section electrolytic.

[Image: http://www.philcoradio.com/images/phorum...88_027.jpg]

[Image: http://www.philcoradio.com/images/phorum...88_028.jpg]

Once that was done, I reinstalled the rebuilt capacitor base back onto the chassis.

[Image: http://www.philcoradio.com/images/phorum...88_030.jpg]

The next photo shows both electrolytics back in place, as viewed from under the chassis:

[Image: http://www.philcoradio.com/images/phorum...88_029.jpg]

There isn't enough room to put the metal cover back over everything...but there is *just* enough room to place a paper cover over it all.

[Image: http://www.philcoradio.com/images/phorum...88_031.jpg]

This cover actually was taken from the single 40 uF electrolytic. That capacitor now has a different (newer) cover over it, removed from a CDE cap, which can be seen in these photos.

Now, with the covers in place, you cannot tell that these electrolytics were ever touched:

[Image: http://www.philcoradio.com/images/phorum...88_032.jpg]

More to come...