Finihes the Rogers 7M932

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Finihes the Rogers 7M932

Dan Walker
Senior Member

Posts: 390
Threads: 105
Joined: Jul 2011
City: Calgary, AB, CA

02-20-2015, 12:44 AM

I finally got this one recapped and replaced all the crumbling wires. I had to replace every wire going to the eye tube. Originally it had a 6X6 eye tube but there was an adaptor for a 6e5 so that is what I used ..The 6X6 tubes are about $90.00 so I opted for the 6e5 instead. It has all rogers tubes except for the 6F6 output.
It will be one more of my keepers.

Attached Files Image(s)

Find

« Next Oldest | Next Newest »

Thread Closed

Messages In This Thread

Finihes the Rogers 7M932 - by Dan Walker - 02-20-2015, 12:44 AM

RE: Finihes the Rogers 7M932 - by sam - 02-20-2015, 04:31 AM

RE: Finihes the Rogers 7M932 - by Arran - 02-20-2015, 05:49 AM

RE: Finihes the Rogers 7M932 - by klondike98 - 02-20-2015, 09:01 AM

RE: Finihes the Rogers 7M932 - by Dan Walker - 02-20-2015, 10:40 AM

RE: Finihes the Rogers 7M932 - by Arran - 02-25-2015, 03:31 AM

RE: Finihes the Rogers 7M932 - by VntgRads - 02-20-2015, 01:04 PM

RE: Finihes the Rogers 7M932 - by PhilcoJohn - 02-25-2015, 10:34 AM

RE: Finihes the Rogers 7M932 - by KCMike - 02-25-2015, 07:20 PM

View a Printable Version

Users browsing this thread: 1 Guest(s)

Recent Posts
Restoration of the Canadian General Electric A-87
I also checked all the radio tubes on my Hickok 530 tube tester. The 5Z3 kenotron turned out to be faulty, all the other...RadioSvit — 08:02 AM
Restoration of the Canadian General Electric A-87
Well... While the varnish is drying up, I started repairing the chassis... Of course I started by replacing the pa...RadioSvit — 07:12 AM
Philco Model 38-7: what caps & resistors do fail typically?
Hello Martin, Welcome aboard our little community what great Model 38-7 Sincerely Richardradiorich — 12:30 AM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum Martin. I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM
Part numbers to model cross
Jim, We have this index put together by Dale Cook but I don't think that is quite what you are looking for. The Parts...klondike98 — 09:37 PM
Philco Model 38-7: what caps & resistors do fail typically?
Yep the dim bulb test is OK but I'd definitely replace all those electrolytics before I did it. Since those #47 conden...klondike98 — 09:18 PM
Philco 42-345 Restoration/Repair
The resistor is a 2.2 Meg, it was the last one I hadn't replaced. The broadcast is coming in after replacing it.osanders0311 — 09:09 PM
Philco 42-345 Restoration/Repair
What does the resistor measure? I think it should be 3.3 Meg. If the oscillator coil has continuity and the resistanc...RodB — 09:03 PM
Philco Model 38-7: what caps & resistors do fail typically?
Good idea to check the coils... then I'll get hold of an incadescent light bulb and see what happens when the unit is sw...Musaeum — 08:49 PM
Philco 42-345 Restoration/Repair
I have that same set, ain't too much shortwave I like anyway.....it is a good AM DX set. PaulPaul Philco322 — 08:32 PM

Who's Online

There are currently 1354 online users. [Complete List]
» 2 Member(s) | 1352 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me