511 Issue

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

511 Issue

morzh
Odobenus rosmarus

Posts: 16,507
Threads: 572
Joined: Oct 2011
City: Jackson State, Province, Country: NJ

02-28-2015, 02:11 PM

(02-28-2015, 09:26 AM)bdi1976 Wrote: I cannot identify the connections on the transformer, but it says that terminals 1-3 should be 375 V-AC. Only 2 of my terminals have high voltage, but only 190 V-AC.

1.Pull out the 80 tube.
2. In the panel for this tube Measure voltage on AC setting between the two sockets for the NARROW pins (the Fats are filament). You should have your voltage there.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.

Find

« Next Oldest | Next Newest »

Thread Closed

Messages In This Thread

511 Issue - by bdi1976 - 02-28-2015, 09:26 AM

RE: 511 Issue - by morzh - 02-28-2015, 02:11 PM

RE: 511 Issue - by bdi1976 - 03-02-2015, 12:27 AM

RE: 511 Issue - by morzh - 03-02-2015, 09:38 AM

RE: 511 Issue - by Radioroslyn - 03-02-2015, 06:27 PM

RE: 511 Issue - by bdi1976 - 03-02-2015, 09:21 PM

RE: 511 Issue - by bdi1976 - 03-14-2015, 12:41 PM

RE: 511 Issue - by morzh - 03-14-2015, 12:53 PM

RE: 511 Issue - by Radioroslyn - 03-14-2015, 05:02 PM

RE: 511 Issue - by bdi1976 - 03-14-2015, 05:22 PM

View a Printable Version

Users browsing this thread: 1 Guest(s)

Recent Posts
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM

Who's Online

There are currently 739 online users. [Complete List]
» 1 Member(s) | 738 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me