Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Dynakit Stereo 70 Refurb
#35

I have a ST 70 and come to think of it a ST35 and a MKIII all sitting in the HI-FI collection closet. Don't have room to run all of them. Have talked to Sue about adding on to the museum for a 50s, 60s and 70s Hi-Fi display - not to enthusiastic response.

Anyway I rebuilt the ST 70 with one of those remake filter caps. Like said, not to impressive ratings, but it works. I think that next time I would restuff the original with caps of my liking.

As to the "chrome" paint, I invested in a 5 gal. nickel plating set up ( and a copper one, but you don't need that). If you are doing a lot of these a small kit would do fine. Build your own DC supply. It takes very little current - a battery is too much.

Anyway they are nice units. I could set up a 5.1 surround sound with mine - just kidding. Did I mention that I got them all for $19? But that is another story. Icon_lol

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/


Messages In This Thread
Dynakit Stereo 70 Refurb - by Joeztech - 08-24-2014, 07:01 AM
RE: Dynakit Stereo 70 Refurb - by Phlogiston - 08-24-2014, 10:01 AM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 08-24-2014, 10:34 AM
RE: Dynakit Stereo 70 Refurb - by codefox1 - 08-25-2014, 01:30 AM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 08-25-2014, 06:31 AM
RE: Dynakit Stereo 70 Refurb - by Phlogiston - 08-25-2014, 10:07 AM
RE: Dynakit Stereo 70 Refurb - by gregb - 08-25-2014, 05:15 PM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 08-26-2014, 04:32 PM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 08-30-2014, 03:45 PM
RE: Dynakit Stereo 70 Refurb - by Ron Ramirez - 08-31-2014, 07:49 AM
RE: Dynakit Stereo 70 Refurb - by Pillo69 - 08-31-2014, 10:21 AM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-02-2014, 09:10 AM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-04-2014, 08:10 AM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-05-2014, 01:17 PM
RE: Dynakit Stereo 70 Refurb - by Ron Ramirez - 09-05-2014, 01:44 PM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-05-2014, 02:09 PM
RE: Dynakit Stereo 70 Refurb - by Ron Ramirez - 09-05-2014, 02:13 PM
RE: Dynakit Stereo 70 Refurb - by Arran - 09-07-2014, 02:08 AM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-07-2014, 06:46 AM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-08-2014, 02:20 PM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-08-2014, 05:34 PM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-13-2014, 10:46 AM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-14-2014, 07:54 PM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-17-2014, 04:07 PM
RE: Dynakit Stereo 70 Refurb - by Ron Ramirez - 09-18-2014, 07:48 AM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-18-2014, 11:57 AM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-19-2014, 02:38 PM
RE: Dynakit Stereo 70 Refurb - by Pillo69 - 09-19-2014, 07:39 PM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-21-2014, 07:23 PM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-23-2014, 05:25 PM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 11-15-2014, 08:06 AM
RE: Dynakit Stereo 70 Refurb - by thirtiesradio - 12-22-2014, 09:04 PM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 12-23-2014, 07:31 AM
RE: Dynakit Stereo 70 Refurb - by thirtiesradio - 12-23-2014, 12:53 PM
RE: Dynakit Stereo 70 Refurb - by Phlogiston - 04-18-2015, 06:36 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM
Testing a speaker and output transformer Trutone A2-G
morzh Short-circuited turns can be considered as a half-dead transformer. But on this case transformer will hot and s...Vlad95 — 11:01 AM
Testing a speaker and output transformer Trutone A2-G
I am not sure how a transformer could be weak. It could be inadequate, but only when you replace the original with somet...morzh — 09:56 AM

[-]
Who's Online
There are currently 2145 online users. [Complete List]
» 4 Member(s) | 2141 Guest(s)
AvatarAvatarAvatarAvatar

>