Which model?

Register

Guest Join Us

Hello Guest,

Please feel free to join us!
There are many more parts of the Phorum that only members can see.

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Which model?

JimZ
Member

Posts: 114
Threads: 2
Joined: Jan 2014
City: Southport NC

#5

06-26-2015, 08:06 AM

Some pics from the rear of the top may help us nail down what chassis is in the top section. With a speaker mounted (side firing I assume) in that top section then my guess is someone had a 37-670 and created a two section deal out of the existing cabinet. Any Philco speaker only cabinet Ive seen is coupled originally with a much older type chassis housed in a separate cabinet...none of which(to my recollection) had speakers.
Nothing "wrong" with what you have there it simply may be a reworked original of some sort.
But lets see some pics of the guts!
Edit/Add: And please don't think Im running down or devaluing out of hand what you have there. But everyone deserves to know exactly what they have purchased.

(This post was last modified: 06-26-2015, 09:12 AM by JimZ.)

Find

« Next Oldest | Next Newest »

Messages In This Thread

Which model? - by alpine11 - 06-25-2015, 03:18 PM

RE: Which model? - by klondike98 - 06-25-2015, 05:24 PM

RE: Which model? - by Ron Ramirez - 06-25-2015, 06:16 PM

RE: Which model? - by alpine11 - 06-26-2015, 04:27 AM

RE: Which model? - by JimZ - 06-26-2015, 08:06 AM

RE: Which model? - by morzh - 06-26-2015, 02:09 PM

RE: Which model? - by alpine11 - 06-26-2015, 06:35 PM

RE: Which model? - by JimZ - 06-27-2015, 10:04 AM

View a Printable Version

Users browsing this thread: 1 Guest(s)

Recent Posts
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM
Testing a speaker and output transformer Trutone A2-G
morzh Short-circuited turns can be considered as a half-dead transformer. But on this case transformer will hot and s...Vlad95 — 11:01 AM

Who's Online

There are currently 487 online users. [Complete List]
» 3 Member(s) | 484 Guest(s)