08-06-2015, 11:05 PM
So I got to it tonight instead and got some voltage readings. I can see that I am out of range on pin 3 of the 7X7 but not sure what causes this. I am assuming that getting whatever is causing it will also bring the readings back into line on the 7AF7 as well, or is this incorrect?
7X7
pin 1 = 3.4 AC
pin 2 = 156
pin 3 = -1.4 (-.5 expected)
pin 4 = 0
pin 5 = -.5
pin 6 = n/a
pin 7 = n/a
pin 8 = 3.4 AC
7AF7
pin 1 = 3.4 AC
pin 2 = 74 (65 expected)
pin 3 = 185
pin 4 = 45
pin 5 = 0
pin 6 = 16 (30 expected)
pin 7 = 27 mV (2 expected)
pin 8 = 3.4 AC
7X7
pin 1 = 3.4 AC
pin 2 = 156
pin 3 = -1.4 (-.5 expected)
pin 4 = 0
pin 5 = -.5
pin 6 = n/a
pin 7 = n/a
pin 8 = 3.4 AC
7AF7
pin 1 = 3.4 AC
pin 2 = 74 (65 expected)
pin 3 = 185
pin 4 = 45
pin 5 = 0
pin 6 = 16 (30 expected)
pin 7 = 27 mV (2 expected)
pin 8 = 3.4 AC
