09-03-2015, 02:08 PM
It really sucks not having a print! The output has 4 leads in the picture on the bottom side of the coil on the one lead goes to the middle yellow resistor on the end which is tied to ground. the other lead goes to the plate of the 71
On top one lead goes to the speaker and the other goes to the 26 pin #2 the 4th tube in line. This lead now goes nowhere?"
I powered it up and it draws .34a I get a very slight hum from the speaker
On top one lead goes to the speaker and the other goes to the 26 pin #2 the 4th tube in line. This lead now goes nowhere?"
I powered it up and it draws .34a I get a very slight hum from the speaker
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
