Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x


1935 Gilfillan 43-A
#76

Bob I hear you on the question of over spending on a radio and is it worth it. In the last year I restored, both cabinet and chassis, a Philco 39-25. It’s a beautiful set but I think I spent well over $320+ on it after buying all the cabinet lacquer and finishing supplies, dial glass, output transformer and so forth, way more than I intended. Luckily my wife is supportive of my hobby. My only concern is, it’s just a basic AA5 with a power transformer. I can understand a manufacturer putting a basic chassis like that into a plain or drab square box cabinet but this set has a rather nice stylish looking cabinet with a slopped front, certainly deserving of a more upscale chassis instead of an AA5! On the other hand, my somewhat similarly styled 41-250 log cabin, has I think an 8 tube chassis more befitting that cabinet and so is a much better performer!

Ron

Bendix 0626.      RCA T64  Philco 20B
Philco 41-250.    Philco49-500
GE 201.             Philco 39-25
Motorola 61X13. Philco 46-420     Crosley 52TQ
Philco 37-116.    Philco 70
AK 35                Philco 46-350
Philco 620B.       Zenith Transoceanic B-600
Philco 60B.         Majestic 50
Philco 52-944.    AK 84 
#77

Yes, I also went overboard on a 39-25 restoration...
   

It was in tought shape when I got it:

   

My son asked if he could have it and I was pleased he liked it, so he took it to his condo in Michigan. When he moved up to Toronto he put it in a storage locker in Michigan and just last week when he visited the locker found that it had been broken into and a number of items were stolen including the 39-25 Icon_evil Interestingly, he also had the 48-482 that I had given him for Christmas one year in the locker but they didn't take that, probably too heavy.

   
#78

Yeah...Michigan and storage lockers do not make good combination.

It sucks, this is a really nice looking radio.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#79

I really don't know what they thought that they were going to do with something like a 39-25? An antique dealer wouldn't have paid them $50 for it, and fleabay, fakebook, etc, are too obvious. I'm surprised that there were no video cameras in that storage depo, the ones here have them everywhere.
Regards
Arran
#80

Wow Bob that had to hurt losing that beautiful set to some lowlife. Icon_redface Your radio came out beautifully. I have my 39-25 back on the bench for some tweaking as the reception isn’t the greatest but then I’ve noticed in the last couple of weeks AM reception is bad on several of my radios around here on both new and old radios. It’s been my experience that long wire antenna sets like the 39-25 aren’t near as good as those with built in loops. This 39-25 could have used an RF stage.

Ron        

Bendix 0626.      RCA T64  Philco 20B
Philco 41-250.    Philco49-500
GE 201.             Philco 39-25
Motorola 61X13. Philco 46-420     Crosley 52TQ
Philco 37-116.    Philco 70
AK 35                Philco 46-350
Philco 620B.       Zenith Transoceanic B-600
Philco 60B.         Majestic 50
Philco 52-944.    AK 84 
#81

Very nice, that turned out looking lovely!




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Philco 71 Code 125
Technically, that's C-. B- is chassis ground. The resistor between chassis ground and the HV center tap makes the HV c...MrFixr55 — 11:24 PM
54C Cabinet Refinish
hello Roy, I’d follow Arran’s suggestion and use automotive gasket material, which I keep around for situations like th...radiorich — 10:22 PM
Philco 71 Code 125
This might be one of those cases where it's a ground to an AC voltage and B- to DC.RodB — 08:22 PM
Philco 71 Code 125
Really Rod? I know you would not steer me wrong but AI say this is a short circuit? What if I moved the 6 volt center ta...dconant — 06:40 PM
54C Cabinet Refinish
Roy; Personally I would have left the asbestos alone if it were my set, but you can find a modern substitute that som...Arran — 04:51 PM
Philco 71 Code 125
Looks like that might be the B- buss, so that would be correct.RodB — 01:32 PM
Philco 71 Code 125
I noticed on the code 121 schematic the center tap for the 6 volt winding and hv winding are tied together. Is this corr...dconant — 12:16 PM
Philco 45-6365 Universal IFT Instruction Manual
The Philco Parts Catalog for 1942 shows it as usable for 175 kHz, 260 kHz, and 465 kHz. The instructions will show how t...DaleHCook — 11:19 AM
Stromberg Carlson 1500 Squeal
Hello Rob, I agree with you—I have one here at my house that I need to check out. It’s way over-engineered just to make...radiorich — 11:05 AM
My Atwater Kent 84
Well getting around to restoring my AK84. Mike was a big part in me being able to snatch this one a few years ago. I won...462ron — 10:57 AM

[-]
Who's Online
There are currently 1911 online users. [Complete List]
» 1 Member(s) | 1910 Guest(s)
Avatar

>