Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

New 1929-30 Philco Console Variant Found
#1

http://philcoradio.com/gallery2/1929c/#M...76_Console

http://philcoradio.com/gallery2/1930a/#C..._41_038_77

It was previously thought that the small Philco floor model known as "The Console" only came with first a 65 chassis and later a 76 chassis; and then after June 1930, as a model 30, 41 or 77.

Well, a new variant of this model has been found with a 96 chassis.

[Image: http://www.philcoradio.com/images/phorum/img_006.jpg]

[Image: http://www.philcoradio.com/images/phorum/img_007.jpg]

[Image: http://www.philcoradio.com/images/phorum/img_008.jpg]

It appears to be original, although a caveat should be added that it would be easy for anyone to remove a 77 chassis and install a 96 chassis since they were the same physical size and used the same speaker.

(No, I didn't buy it, but maybe I should have?)

--
Ron Ramirez
Ferdinand IN
#2

looks to be in very nice shape

go buy it Icon_twisted    not full size Icon_thumbup

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#3

I let go one in MA for a very low price, like $75. Just recently. Forgot what chassis.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#4

Heck, we all know Philco liked to use left-over cabinets. My model 30 should be in what I call the 'second-generation' lowboy cabinet, but it is in the same one originally used by the model 95 and such instead.

No matter where you go, there you are.
#5

Cute little consoles, and that one looks to be in pretty nice condition.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM

[-]
Who's Online
There are currently 708 online users. [Complete List]
» 1 Member(s) | 707 Guest(s)
Avatar

>