Posts: 80
Threads: 10
Joined: Sep 2005
City: Warren, Ohio
After two years my 118 is done. Came out pretty good. Original grille cloth. It plays very nicely. Someone had modified the set to work with a loop antenna. Fortunately, the antenna coil was still there, just disconnected.
[Image: http://i614.photobucket.com/albums/tt228...bd9f54.jpg]
Steve Chambers
(This post was last modified: 06-12-2016, 04:03 PM by Steve Chambers.)
Posts: 1,889
Threads: 214
Joined: May 2015
City: Seattle
State, Province, Country: WA
I see only one image - it looks like maybe there were others?
But whatever - I can see you did a beautiful job! 
Posts: 85
Threads: 13
Joined: Jul 2015
City: Rockville, MD
Beautiful job! I have one of those around here somewhere to get to some day. Hope there's no faux finish on it anywhere. Ed
Posts: 80
Threads: 10
Joined: Sep 2005
City: Warren, Ohio
Thanks!
All real wood on this one.
Steve Chambers
(This post was last modified: 06-12-2016, 04:01 PM by Steve Chambers.)
Posts: 80
Threads: 10
Joined: Sep 2005
City: Warren, Ohio
(06-12-2016, 03:45 PM)Nathan Slingerland Wrote: I see only one image - it looks like maybe there were others?
But whatever - I can see you did a beautiful job!
Only one. I don't know how that other stuff got in there or how to remove it.
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Great job.
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
Congratulations ! It looks great.
Posts: 3,157
Threads: 59
Joined: Apr 2011
City: Lexington, KY
That turned out beautiful
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 5,170
Threads: 274
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Posts: 80
Threads: 10
Joined: Sep 2005
City: Warren, Ohio
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
...I still only see one image...
But hey, Steve, congratulations on a great job!
--
Ron Ramirez
Ferdinand IN
Posts: 77
Threads: 24
Joined: Nov 2010
City: Oradell, NJ
06-16-2016, 03:27 PM
(06-12-2016, 03:37 PM)Steve Chambers Wrote: Someone had modified the set to work with a loop antenna. Fortunately, the antenna coil was still there, just disconnected.
I've been guilty of doing that,  but I leave the antenna coil for a subsequent owner to restore it later if they want to, just like with your radio. I sometimes use a ferrite rod hidden inside.
Posts: 157
Threads: 12
Joined: Dec 2012
City: Seattle, WA
Beautiful! High on my list of Philcos to have, kinda surprised it's eluded me so long. But, here's to hoping!
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
PT 6 chassis screws size???
|
| Hello bridKarl,
that sounds right or maybe 8/32 .
Sincerely Richardradiorich — 01:00 AM |
|
PT 6 chassis screws size???
|
| Have this done except for missing chassis screws.
It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Hello Stormlord,
Well done on rewinding that coil it turned fairly good for your first one.
Sincerely Richardradiorich — 09:12 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Well here it is. It ain't pretty, but hopefully it'll work.
I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM |
|
Philco 42-345 Restoration/Repair
|
| Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM |
|
Philco 42-345 Restoration/Repair
|
| Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM |
|
Testing a speaker and output transformer Trutone A2-G
|
| The equivalent of one short turn is basically the same as that of a shorted load.
If it is the primary's turn, then the ...morzh — 03:53 PM |
|
Testing a speaker and output transformer Trutone A2-G
|
| I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM |
|
Philco model 38 code 121 not receiving signal.
|
| As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")