A trimmer adjustment tool.
Posts: 16,507
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
http://www.ebay.com/itm/1930s-PHILCO-RAD...7675.l2557
I recently found this on eBay and bought it.
I have been looking for something like that for a while. The insulating sockets I found cost so much (in hundreds ) it is not funny. The one I made by shaping a softened by heating body of a ball pen after a suitable size nut, is not that good, works on those trimmers that are freely rotated, not on those that need some effort.
This guy's idea is pretty ingenious and well executed. And for $13 and free shipping I think it cant be beat.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 5,170
Threads: 274
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Here's how I made a similar one a few years ago and posted it on the Phorum....
http://philcoradio.com/phorum/showthread...8#pid52048
Posts: 16,507
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Bob
And I was thinking of doing the same. But then I needed to 1) find and buy the nylon screws, 2) get a dowell, 3) what is drilling? Does it hurt?  ......
So when someone did all that for me for 13 bucks....I could not resist.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 5,170
Threads: 274
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Yes, I agree! I'd probably buy it now too, but he wasn"t selling them when I made mine. His are prettier than mine also..... 
Posts: 16,507
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
No, he wasn't. It's a recent thing. A few months.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 1,205
Threads: 84
Joined: Jan 2014
City: Annapolis, IL
State, Province, Country: USA
Thanks Mike!
If I could find the place called "Somewhere", I could find "Anything" 
Tim
Jesus cried out and said, "Whoever believes in me , believes not in me but in him who sent me" John 12:44
Posts: 5,170
Threads: 274
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Posts: 16,507
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
This is why I decided to buy it then - I figured it would happen sooner or later.
I think he is testing it, if it sells still, he will keep it, otherwise it will go back.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 1,205
Threads: 84
Joined: Jan 2014
City: Annapolis, IL
State, Province, Country: USA
I got one coming. Yup, price went up. Still not bad. Takes work to make then eBay fees etc. Wish I'd known sooner tho.
If I could find the place called "Somewhere", I could find "Anything"
Tim
Jesus cried out and said, "Whoever believes in me , believes not in me but in him who sent me" John 12:44
Posts: 1,205
Threads: 84
Joined: Jan 2014
City: Annapolis, IL
State, Province, Country: USA
Just found out Tom is discontinuing making these. Looks like he has one left as of this writing. Maybe if some of us ask, he will make some more.
If I could find the place called "Somewhere", I could find "Anything"
Tim
Jesus cried out and said, "Whoever believes in me , believes not in me but in him who sent me" John 12:44
Posts: 751
Threads: 91
Joined: Nov 2015
City: Jonesboro
State, Province, Country: AR
I just ordered one. Hope to have it this week, though it might be a while before I actually put it to use.
Blessings,
Jeff W.
Jonesboro, Arkansas
http://jeffsradios.weebly.com
God loves you as you are, not as you should be, because none of us are as we should be. - Brennan Manning
Posts: 4,894
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
For $14.95 it had better be one like one of the original ones made out of fiber, the ones linked to look kind of Mickey mouse in my opinion. Before I found one of the original style I used a 1/4'' nut driver wrapped in electrical tape, since it's only adjusting a nut on a trimmer cap. The only reason the tool has to be insulated is because the nuts on the IF trimmers often have B+ on them, inductance isn't really an issue.
Regards
Arran
Posts: 16,507
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Arran
Inductance is not an issue, you are right, the capacitance however is, at least sometimes. Depends on the socket. I also used my socket wrapped with insulating tape, made it work but it was no fun overall.
And, yes, B+ is an issue when adjusting the left side of an IF filter.
This one is not made of fiber but is as good, pretty sturdy and the fact it is all insulating material makes it electrically equal to fiber.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 1,205
Threads: 84
Joined: Jan 2014
City: Annapolis, IL
State, Province, Country: USA
Mine showed up yesterday and it looks good, not just thrown together. Even the ends of the handle are beveled. I could make one also, but that takes time and some trial and error. I don't mind paying a little for something that has already had that done, and I can just grab and use when needed. Mike is right about the fact this if not just for those trimmers with B+. Anyone here that has ever done an alignment with a metal nutdriver knows how much fun it is to try adjusting a padder and constantly having to guess where it is set, then remove the driver just to find it changes each time. Sure, you can do it this way - but why fight it when you don't need to?
PS: I mentioned this phorum to Tom and he seemed to indicate if there is enough interest that he would be willing to tool up and make another run of these.
If I could find the place called "Somewhere", I could find "Anything"
Tim
Jesus cried out and said, "Whoever believes in me , believes not in me but in him who sent me" John 12:44
Posts: 465
Threads: 31
Joined: Sep 2009
City: Lapeer
State, Province, Country: MI
(09-14-2016, 01:32 PM)PhilcoPhan1936 Wrote: I just ordered one. Hope to have it this week, though it might be a while before I actually put it to use.
Jeff, There are only two reasons to buy tools immediately; either you need it or you might need it sometime.
Joe
Joe
Matthew 16:26 "For what does it profit a man if he gain the whole world, yet lose his own soul?"
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Philco 42-345 Restoration/Repair
|
| Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM |
|
Philco 42-345 Restoration/Repair
|
| Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM |
|
Testing a speaker and output transformer Trutone A2-G
|
| The equivalent of one short turn is basically the same as that of a shorted load.
If it is the primary's turn, then the ...morzh — 03:53 PM |
|
Testing a speaker and output transformer Trutone A2-G
|
| I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM |
|
Philco model 38 code 121 not receiving signal.
|
| As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Well why not! :lol:Stormlord5500 — 03:14 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM |
|
Testing a speaker and output transformer Trutone A2-G
|
| morzh
Short-circuited turns can be considered as a half-dead transformer.
But on this case transformer will hot and s...Vlad95 — 11:01 AM |
|
Testing a speaker and output transformer Trutone A2-G
|
| I am not sure how a transformer could be weak. It could be inadequate, but only when you replace the original with somet...morzh — 09:56 AM |
|
Who's Online
|
There are currently 2216 online users. [Complete List]
» 2 Member(s) | 2214 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
