Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Model 39-116
#1

Where can I find the tube layout and schematic for a Philco Model 39-116?
#2

Welcome to the Phorum!
Icon_wave

A free schematic can be found on nostalgiaair.org
http://www.nostalgiaair.org/Resources/266/M0013266.htm

The Service Bulletin #310 is available on the audiophool site:
http://www.audiophool.com/Philco.html

( the reader for the djVu file is here; https://www.cuminas.jp/en/downloads/download/?pid=1 )

A more readable set of schematics and info can be had for a few bucks from Chuck.

www.philcorepairbench.com/schematics.htm

For more resources that might be helpful, see:

http://philcoradio.com/phorum/showthread.php?tid=14950
#3

Thank you!  That's great information!  I've got a check going out to Chuck today!
Tim
#4

(09-28-2016, 08:13 PM)klondike98 Wrote:  I just watched a Philco factory tour video on Youtube. Here is a link:
https://www.youtube.com/watch?v=kanPsUDyKrU
Welcome to the Phorum!
Icon_wave

A free schematic can be found on nostalgiaair.org
http://www.nostalgiaair.org/Resources/266/M0013266.htm

The Service Bulletin #310 is available on the audiophool site:
http://www.audiophool.com/Philco.html

( the reader for the djVu file is here; https://www.cuminas.jp/en/downloads/download/?pid=1 )

A more readable set of schematics and info can be had for a few bucks from Chuck.

www.philcorepairbench.com/schematics.htm

For more resources that might be helpful, see:

http://philcoradio.com/phorum/showthread.php?tid=14950
#5

Hi ozo,
Welcome to the Phorum!
Icon_wave
I think you're trying to post something...give it another try.
#6

The remarks re: the youtube video of Philco's Factory Tour was my first post and had to go through moderation. I mentioned it because it is free but in the list of resources it was not. There are many videos on you tube but you have to look. Just plug in your model number and there may be videos of it including repair tutorials.

Here is an example of a youtube video of a huge Philco radio collection I liked.  
https://www.youtube.com/watch?v=7Eb35g1vqH4

Yea I am a new guy and glad to be here. I started out collecting vintage audio gear like receivers, amps, turntables, and tape decks but could not afford tube amps. Then I got my first tube radio and now have five. Three are Philcos; 48-482, 39-75, and a 46-421.
#7

Thanks for watching, Ozo. Glad you liked my videoIcon_smile

Greg V.
West Bend, WI
Member WARCI.org
#8

(10-18-2016, 06:43 PM)NostalgiaRadioTime Wrote:  Thanks for watching, Ozo. Glad you liked my videoIcon_smile

It is well done and I liked the earlier one too. I was watching the 2016 video for a while before I realized it was the same collection only on steroids. Icon_clap
#9

Ha! It's changed even since the 2016 video...I thinned it out a bit. Down to 75 now.

Greg V.
West Bend, WI
Member WARCI.org




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage! Ron462ron — 07:20 AM
Model 70 Cabinet Trim
Steve might have some trim left. Not sure he is making anything.morzh — 06:12 AM
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM

[-]
Who's Online
There are currently 1013 online users. [Complete List]
» 2 Member(s) | 1011 Guest(s)
AvatarAvatar

>