Posts: 90
Hi,
Posts: 465
Hi Alan, A photo and model number of the Hornyfon would help us assist you. Thanks, Joe
Matthew 16:26 "For what does it profit a man if he gain the whole world, yet lose his own soul?"
Posts: 16,510
Hornyfon.....I thought it is a phone sex service's name
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 2,118
I always wanted one of those just so I could tell people that I had it.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 16,510
Doesn't look all that horny to me......
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 2,037
That name definitely made me do a double take! Some things just don't translate well...
Posts: 2,573
mike
sam
Posts: 90
Here's a photo, a Prinzess W362A
Attached Files
Image(s)
Posts: 16,510
OK.
Now we add the "princess" to the name.
No really....this is too much
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 150
Here's my Hornyphon before I restored it. This one is the W455X "Potentat".
Posts: 16,510
I bite my tongue......their naming system was clearly devised by someone who read too much of the Playboy.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 2,037
Maybe these radios are like the band Toto. You chuckle at the name, then they blow you away with their performance!
Posts: 16,510
German / European radios are very good, but american are still better on average, though some European ones are really stylish.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 4,896
It isn't usually a problem to power a 50 cycle device on 60 cycle, unless it has an AC motor in it in which case the motor may spin faster. Transformers usually don't care if they are operated at a higher line frequency, within reason of course, but they don't like the opposite. Most European radios have taps on the transformer primary that allow operation on several different line voltages, sometimes it's a plug on the transformer, other times there is a wire that you have to undo from a screw terminal and move to another terminal. You may have to remove the back to get at it if it has a voltage selector, if not come back to us for a plan "B". This Hornyphon looks like a later model from the 1960s if the eye tube is any indication, it looks like an EM84.
Posts: 90
Thanks, there isn't a visible panel of plugs like some models so I'll get in there and take a closer look at the transformer.
Users browsing this thread: 1 Guest(s)
Recent Posts
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage!
Ron462ron — 07:20 AM
Model 70 Cabinet Trim
Steve might have some trim left.
Not sure he is making anything.morzh
Model 70 Cabinet Trim
Hello musar,
First all welcome to the forum and yes that is true that steve stopped making trim .
Sincerely Richar...radiorich
Model 70 Cabinet Trim
I have recently come into possession of a Model 70. The trim around the base needs to be replaced. If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks.
fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough.
One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now.
Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Who's Online
There are currently 227 online users. [Complete List ]» 2 Member(s) | 225 Guest(s)
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
