Posts: 5
Threads: 1
Joined: Mar 2017
City: ATL Georgia
Man you guys are good! There is an oval cut-out behind the dial! I can see now where the philco face plate was put over the front of another cabinet. It is not visible in the pictures but at the front of the chassis you can see where the wood was chipped out to make it fit. Thats amazing!!! Whoever did this did a masterful job in making a presentable radio. You can't help but wonder what happened to the original cabinet. I probably would never had noticed without your help. I believe it is a 1935, 118 that was put in another cabinet. I'm on the look out for old radios. I'll show you the next one I find.
thanks,
earnestly
(Ernest Lee)
Posts: 670
Threads: 11
Joined: Sep 2014
City: Bellmawr, NJ
Very NICE cabinet,,,thou,,,
Posts: 157
Threads: 12
Joined: Dec 2012
City: Seattle, WA
I've run across that cabinet before, it's pictured in RadioMuseum.
I was thinking Emerson, but it took me a while to find it again. Here it is, apparently used with a couple different model chassis:
http://www.radiomuseum.org/r/emerson_ar1...ch_ar.html
http://www.radiomuseum.org/r/emerson_aw180.html
http://www.radiomuseum.org/r/emerson_ar181.html
http://www.radiomuseum.org/r/emerson_at181.html
(This post was last modified: 03-21-2017, 05:51 PM by
palegreenthumb.)
Posts: 1,889
Threads: 214
Joined: May 2015
City: Seattle
State, Province, Country: WA
Posts: 670
Threads: 11
Joined: Sep 2014
City: Bellmawr, NJ
YA BUT,,,Emerson 's ,,Have a Large HOLE for thee Dial's,,,soo,,Emerson -----MADE a Cabinet for "Philco",,,I don't think soo,,,,,MAYBE ????
Posts: 157
Threads: 12
Joined: Dec 2012
City: Seattle, WA
(03-20-2017, 06:40 PM)earnestly Wrote: I can see now where the philco face plate was put over the front of another cabinet.
According to Earnest, the original cabinet front is still there, behind a face plate cut for the Philco.
-Rodney
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
