Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Variac and multimeter recommendations?
#1

What variac models do you guys recommend? I'm looking for something that hopefully doesn't cost hundreds of dollars, but I can use to slowly power up my Model 20 (and future projects).

And while I'm on the subject, what about multimeter recommendations? I have a GDT-11 and it's ok but pretty bare bones.

Greg

"We are here to laugh at the odds and live our lives so well that Death will tremble to take us."
#2

This variac seems to be popular with restorers and is inexpensive. The 5 Amp rating should be sufficient for most any vintage radio.

https://www.circuitspecialists.com/varia...DQod3AUNPQ

As far as DMM's, I am partial to the Fluke handheld models. I have had my Fluke 79 for more than 20 years and it has never failed me. I just checked the calibration and it is still spot on. Recently bought as second one for $50 on ebay.

If you need a really inexpensive meter, I can recommend this one. It is a steal at this price and is surprisingly accurate ( within 1% of my Flukes).

http://www.ebay.com/itm/Hot-Digital-Mult...SwrklVUeqn
#3

I got this multimeter off amazon several years ago and it been doing fine. The thing I like about it most is that it has a frequency meter on it as well (Hz). I use it to set the signal gen to exactly the right frequency.
#4

Another vote for Fluke.... you'll pay more but you know you have a quality and accurate DVM that will probably outlast you.  We used Flukes at work and occasionally I'd hear where someone lost or misplaced one but never saw or heard of one having having issues and some of the guys were pretty hard on them.

The models I'm most familiar with are the 87 and 77.  The 77 I bought new off eBay because I wanted the same dependability on my work bench as I had at work and it hasn't disappointed. 

The other Fluke that not many people know about is the 27/FM that was used by the military and those things are built like tanks.  You can still find them on eBay but you have to look closely for one that wasn't beat to death.  I bought one several years ago for a spare (like I needed another meter) that was in great condition with the case, instructions, and a HV probe.  They are good meters if you can still find a nice one:

http://www.antiqueradios.com/forums/view...8&t=167123

I will say that the meter Bob (Klondike98) mentioned sounds nice. There have to be many meters like his that aren't quite Flukes but are much better than the Harbor Freight $5 meters.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#5

I have a Fluke. And at work when ordering one I also ordered a Fluke. at work I have 87 model, at home - forgot.

But: if budget is a major consideration, Tenma makes very nice products. At a much lower price.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#6

Thanks again, guys.

Greg

"We are here to laugh at the odds and live our lives so well that Death will tremble to take us."
#7

I use a Fluke 89 that I bought 20 years ago and it is the best meter I have ever owned. I did give some of those cheap ones a try and they truly are not worth the money or the time it took to drive to the store to get one.

Gregb




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 42-345 Restoration/Repair
Ok MrFixr55,  I have tried the DeoxIT D5 on the band switch and even though it has relieved the tension I felt when turn...osanders0311 — 11:11 AM
Part numbers to model cross
Is there a reference somewhere where you can punch in Philco part numbers and see what models those parts were used in?Jim Dutridge — 10:17 AM
Philco 42-345 Restoration/Repair
Hi OSanders, Look carefully at the band switch. Turn it slowly and "wiggle" it around the desired band. ...MrFixr55 — 12:33 AM
5U4 vs 5Z4 tubes
I think that RCA and GE introduced metal tubes in the USA in 1936.  I don't know if they were being made by RCA, GE or b...MrFixr55 — 11:20 PM
Philco 42-345 Restoration/Repair
Vlad95, Thank you for the stringing guides and wow there are so manyosanders0311 — 06:01 PM
5U4 vs 5Z4 tubes
A pre war Hallicrafters, and an early one too, very nice! 1936 is pretty early for metal tubes too, which would explain ...Arran — 05:58 PM
Philco 42-345 Restoration/Repair
Thanks Rod, "When you hear the background hiss and no station it usually indicates that the oscillator quit" ...osanders0311 — 05:52 PM
Philco 42-345 Restoration/Repair
RodB :beerchug:Vlad95 — 10:22 AM
Philco 42-345 Restoration/Repair
Vlad, you nailed it. Swiss and German roots.RodB — 09:54 AM
5U4 vs 5Z4 tubes
Well this is a Hallicrafters SX/9 circa 1936. No real issues so far although I dodged a real bullet with a cap that was...bridkarl — 07:59 AM

[-]
Who's Online
There are currently 1452 online users. [Complete List]
» 1 Member(s) | 1451 Guest(s)
Avatar

>