Please ID this Silvertone
Posts: 933
Threads: 140
Joined: Mar 2015
City: Lansdale
State, Province, Country: PA
Please ID Cannot find any info or schematic on this..
[Image:
https://farm5.staticflickr.com/4050/3490...f0b0_b.jpg ]
Thanks
Skip...
(This post was last modified: 09-22-2017, 10:57 PM by
vecher .)
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Sears Silvertone 1764 in riders 4-3
It is the only one with a 1v tube in the lineup.
See link
http://www.grillecloth.com/sylvania/tube...ubmit&db=3
Riders 4-3
http://www.americanradiohistory.com/Arch...34-STU.pdf
Attached Files
Image(s)
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
(This post was last modified: 05-23-2017, 12:15 AM by
OldRestorer .)
Posts: 933
Threads: 140
Joined: Mar 2015
City: Lansdale
State, Province, Country: PA
Thanks Kirk... Was in Joe's shed.. Got it for 10.00
Also got a Heathkit IT-11 Cap tester for 15.00
My heathkit C-3 is not working..
Skip...
Posts: 7,301
Threads: 269
Joined: Dec 2009
City: Roslyn Pa
Hope your resistance line cord is good! If not you'll need to scare up a 7.4mf non polarized cap to drop the heater voltage.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 3,157
Threads: 59
Joined: Apr 2011
City: Lexington, KY
Nice little depression set Skip!
(05-23-2017, 07:39 AM) Radioroslyn Wrote: Hope your resistance line cord is good! ......
What are the odds of that? We used to find them N.I.B. and you could hear them crack as you tried to straighten them out
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 7,301
Threads: 269
Joined: Dec 2009
City: Roslyn Pa
I think I have still have a few of them around some where. Got to preheat them to avoid the crackels.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
boy that shed is never ending
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Geeze,
I better get back there before you clean it out Skip,
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 7,301
Threads: 269
Joined: Dec 2009
City: Roslyn Pa
Just what you need some more curtain burners!!!!!![Image:
http://philcoradio.com/phorum/images/smi...on_eek.gif ]
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 933
Threads: 140
Joined: Mar 2015
City: Lansdale
State, Province, Country: PA
Yup Every time I go in there I find something Different I had not seen before..
Skip...
Posts: 933
Threads: 140
Joined: Mar 2015
City: Lansdale
State, Province, Country: PA
Where do I find a 7.4uf Cap?
Skip...
Posts: 670
Threads: 11
Joined: Sep 2014
City: Bellmawr, NJ
8uf will work,,,,can,,, I ,,have a hall pass to the Shed,,,,I can help clean it out ,,,lololol,,,
Posts: 933
Threads: 140
Joined: Mar 2015
City: Lansdale
State, Province, Country: PA
I will check with Joe He is the one doing this for a friend..
I will let everyone know if he has another open house per say.. He is a good friend and its only about 10 minutes from me..
Skip..
Posts: 7,301
Threads: 269
Joined: Dec 2009
City: Roslyn Pa
Hey Skip,
Insteadi of finding a 7.4 non polarize cap you could use a 140 ohm resistor @20w or better, and 1N4007.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 933
Threads: 140
Joined: Mar 2015
City: Lansdale
State, Province, Country: PA
Terry, I heard that Diodes seem to fail a lot..Maybe that's not true.. Could you draw where in the circuit they should go?
Skip...
Users browsing this thread: 1 Guest(s)
Recent Posts
Model 70 Cabinet Trim
musar ,
Well if you have any more questions feel free to post away .
Sincerely Richardradiorich — 08:56 PM
Model 70 Cabinet Trim
Although I have not made any cabinets or cabinet parts for a couple of years, I still have some parts left over, includi...Steve Davis — 06:26 PM
philcorepairbench.com - shadow-meter
Thanks Ron.fenbach — 02:43 PM
Model 70 Cabinet Trim
Thank you, Gary. Before making my original post, I had clicked on "Steve Davis Cabinets" only to find that it...musar — 02:25 PM
philco predicta
Welcome to the Phorum, cgl18! I am not your resource for television repair, but lots of friendly help is available here...GarySP — 02:12 PM
Model 70 Cabinet Trim
Welcome to the Phorum, musar! You can send Steve Davis a private message (PM). The site is at the top of the Home page...GarySP — 02:09 PM
Model 70 Cabinet Trim
How do I contact him? The only contact information for him I could find when searching online was a telephone number th...musar — 10:38 AM
philco predicta
Hello, good afternoon, I would like to ask what the possible problem could be if I don't have an image on the screen. I ...cgl18 — 10:19 AM
Philco model 38 code 121 not receiving signal.
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage!
Ron462ron — 07:20 AM
Who's Online
There are currently no members online.